Sylvania 6720FDE owner manual Playback

PLAYBACK

NORMAL PLAYBACK SLOW MOTION

TV/VCR

TV/VCR

Make sure ...			Press the PAUSE button, then press F.FWD button to
• TV/VCR/DVD power must be turned on.			start the playback in slow motion. The TV/VCR/DVD
			mutes the sound during slow motion. Press the PLAY
			button to return to normal playback.
1 Insert a prerecorded tape
			NOTE: If it is left in the Slow mode for more than
If the erase-protection tab has been removed, the			five minutes, the TV/VCR/DVD will automatically
TV/VCR/DVD will start playback automatically.			go into the Stop mode.
				PICTURE SEARCH
2 To begin playback	PLAY B
Press the PLAY button.
					TV/VCR
			This feature is very useful in finding or skipping over
			a particular scene on a tape. In this mode, the sound
			will be muted.
			1)You may view a video tape at a high speed in
3 To stop playback
	STOP			either a forward or reverse direction by pressing
Press the STOP button when play-				the F.FWD or REW button during playback. (in the
back is completed.				SP / LP / SLP modes)
				NOTE:
				•
				If you press the F.FWD or REW button on the
NOTES:				front panel in the DVD mode, the VCR forward
				or reverse will start. Please press the STOP /
• If you press the PLAY button (of the TV/VCR side)
				EJECT button once to stop it, twice to eject it.
in the DVD mode, you can start the VCR playback.			2)Press it again and the TV/VCR/DVD will now search
• If you press the SELECT button during the VCR
				in super high speed. (in the LP / SLP modes only)
playback, it will stop and the mode will change to				NOTE:
the DVD mode. In addition, the same function				• Tapes recorded in the SP or LP mode will dis-
operates with the DVD side PLAY button or the				play a noise bar on the TV screen and the picture
OPEN/CLOSE button.				may revert to Black and White. This is normal.
			3)Press the PLAY button to return to normal speed.
TRACKING ADJUSTMENT
				STILL PICTURE
		TV/VCR
• Tracking adjustment will be set automatically					TV/VCR
			You can view a still picture on the TV screen during playback
(Digital Tracking function) when you start play-
			(the Still mode). Press the PAUSE button during playback.
back.
			Only tapes recorded in the SLP mode will show the least
• However when playing pre-recorded tapes or tapes
			amount of lines.Press the PLAY button to return to playback.
recorded on other VCR, noise lines (black and			NOTES:
white streaks) may appear on the playback picture.
			• You can advance the picture one frame at a time by
If this occurs, you can adjust the tracking control
				pressing the PAUSE button during the Still mode.
manually by pressing the CHANNEL button K or
			• If it is left in the Pause mode for more than five
L until the streaks disappear. To return to the DTR				minutes, the TV/VCR/DVD will automatically
function, stop the tape once and start playback				switch to the Stop mode.
again.
				VERTICAL HOLD CONTROL
• You can reduce the noise lines by pressing the
CHANNEL button K or L in slow mode, too.
					TV/VCR
Tracking adjustment in Slow mode will not be set
			In the Pause/Still mode only, when the picture begins
automatically.
			to vibrate vertically, stabilize the picture by pressing
			the CHANNEL button K or L.
			NOTE:
			If there are video noise lines on the screen, see Tracking
			Adjustment section.
	- 26 -				EN

1C29