Sylvania 6720FDF owner manual Connecting to Front A/V Input Jacks

CONNECTING TO FRONT A/V INPUT JACKS

When you watch a program recorded on another source (VCR or video camera), use the	AUX
AUDIO/VIDEO input jacks on the front of the unit.

Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.

Then press [SELECT] or [CH. K / L] until “AUX” appears on the screen.

ex.

VCR or video camera, etc.

NOTE:

E SEARCH D

To the Audio output jacks

(OUT)	Audio cable	(IN)
	(commercially available)

HEADPHONE VIDEO L-AUDIO-R

To the Video output jack [Front of the unit]

(OUT) Video cable	(IN)	[Fig. 5]
(commercially available)

•When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH

DIGITAL INPUT JACKS (for DVD)

Use an audio coaxial digital cable (commercially available) for the audio connections. Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

ex.

MD deck, DAT deck, etc.

ANT.	AUDIO OUT	(OUT)
	COAXIAL
		To AUDIO OUT
		COAXIAL jack
To Coaxial digital		(Only DVD AUDIO OUT)
Audio input jack

(IN)	Audio coaxial digital cable	[Fig. 6]
	(commercially available)

NOTES:

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner’s Manuals for the components to be connected to the unit.

•Set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing a unit using incorrect set- tings may generate noise distortion and may also damage the speakers.(Refer to page 44.)

- 13 - EN