Magnavox CCZ252AT owner manual Automatic Operation Features

Page 45

CCZ252comb.QX33 4/6/99 8:50 PM Page 45

Automatic Operation Features 45

The following playback features will always operate.

Automatic Playback

When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. If a real-time counter memory is set, the TV/VCR will only rewind the tape to the point at which the counter was set to zero, then stop. The TV/VCR will not turn itself off or eject the tape.

Memory Rewind, Power Off

When the POWER button is pressed while the TV/VCR is rewind- ing a tape, REW → POWER OFF will appear on-screen. The TV/VCR will turn itself off when the tape has finished rewinding.

If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.

Tape Eject

A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment

The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually, press the CHANNEL o/p but- tons on the TV/VCR or the TRACKING o/p buttons on the remote control.

Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.

Before	After
Tracking	Tracking
Adjustment	Adjustment

Image 45

Contents CCZ252AT For Customer Use Dear Philips Magnavox product ownerFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Before Using the TV/VCRUsing the Remote Control TV/VCR MaintenanceHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRod Antenna Crooked Pin Straight Pin Hooking Up the TV/VCR cont’dSelect another channel Turning On the TV/VCRPress the Menu button Language SelectionPress the Number 1 button to choose Select LAN GuageInput Cable Exit PRIM. Setup VCR Program VCR Setup Caption Automatic Channel SetupPress the Number 3 button to select ADD/DELETE Channel Adding/Deleting ChannelsSetting the Clock Manual Clock SettingPress the Number 6 button to select SET Clock Press the Number 2 button to select SET Manual Clock Setting the Clock cont’dAutomatic PBS Channel Selection Auto Press the Number 1 button to select SET PBS CHManual PBS Channel Selection Find the time UALDaylight-Saving Time Time Zone Press the Number 4 button to select SET Time ZonePress the STATUS/EXIT button twice Front Panel ANTenna Jack Antenna Hole Rear PanelRemote Control Buttons ALT. CH Alternate Channel Button Volume / ButtonsChannel / Buttons Mute ButtonAdjusting the Picture Controls Decrease Increase Adjusting the Picture Controls cont’dMore brilliant SofterCounter only Mode On ModeOFF Mode On-Screen Status DisplaysREMINDER.1 Press the PLAY/ button or the STOP/ button to selectPlaying To stop recording, press the STOP/ button Tape Speeds Press the RECord/OTR button once to start recordingOTR One-Touch RecordingDifferent brands of equipment may operate differently Rerecording Tape DuplicationSelect a once, daily or weekly recording Timer RecordingTime OFF To Correct Press Clear To END Press Exit Timer Recording cont’dPlease see page 48 for more Helpful Hints Checking or Clearing Timer Recordings Record Defeat Press the Number 4 button so that on appears besideRecord Defeat Setting the Sleep Timer Closed Caption CaptionCAPTION1 Standard Closed Captions Closed Caption cont’dVolume Bar Repeat Play Press the Number 2 button so that on appears besideRepeat Play Insert a tape in the TV/VCR Press the Menu button B Repeat PlayRepeat Play cont’d Button to reset the real-time counter to zero Real-Time Counter MemoryWhile the counter remains on-screen, press the Clear Automatic Operation Features Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still PictureGlossary SpecificationsHelpful Hints Helpful Hints cont’d TV/VCR Combination Limited WarrantyIndex Supplied Accessories