Magnavox CCZ252AT owner manual Specifications, Glossary

Page 47

CCZ252comb.QX33 4/6/99 8:50 PM Page 47

Specifications

General

CRT: 25-inch in line gun

Television system: NTSC-M

Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard

Video Heads: Two heads

Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)

Relative Humidity: 10% to 75%

Power requirement: AC 120V, 60Hz

Power consumption: 125W

Sound output: 1W Dimensions:

24-1/2" (H) x 25-1/32" (W) x 20-3/32" (D)

622.5mm x 636 mm x 510 mm Weight: 70.4 lbs (32 kg)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

2 – 13

Midband: A – 1

Superband: J – W

Hyperband: A-5 – A-1

Special Channel: 5A

Ultraband: 37 – 94, 100 – 125

Terminals

Antenna IN: VHF/UHF 75 ohms unbalanced

Video IN: RCA connector

Audio IN: RCA connector

Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p

Audio input level: -10dBv

Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

Designs and specifications are subject to change without notice and without our legal obligation.

Specifications / Glossary 47

Glossary

AUDIO Jack: jack located on the front of the TV/VCR which is used to record audio from anoth- er source.

Automatic Channel Setup: process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL ▲/▼ buttons, you only scan through channels you receive.

Bands: settings that allow you to tune channels.

•Antenna – VHF (very high frequency; channels 2

-13) and UHF (ultra high frequency; channels 14

-69).

•Cable – all standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on-screen.

Color: adjusting pales or brightens the TV/VCR color.

Dubbing: copying a tape using a VCR.

HQ: high quality; a feature in the TV/VCR circuitry which provides enhanced picture detail.

Line Input: The channel to which you set your TV/VCR during dubbing. The line input channel is always channel 00 (A/V IN). To exit line input mode, press the CHANNEL ▲/▼ buttons or the Number buttons to select another channel.

Mode: a TV/VCR operation.

OTR: One-Touch Recording; programming a timed recording that starts immediately and records for 30 minutes to eight hours, whichever you specify.

Picture: adjust to increase or decrease the con- trast of the picture on-screen.

Sharpness: adjusting softens or clarifies the picture on the TV screen.

Tape Speeds: how fast the tape travels during playback or recording.

•SP (standard play) – fastest tape speed (record- ing time for a T120 tape is approximately two hours); best picture quality.

•LP (long play) – average tape speed (recording time for a T120 tape is approximately four hours).

•SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).

Tint: adjusting changes the tints of the picture on the TV/VCR from purple to green.

VCR: video cassette recorder.

VIDEO Jack: jack located on the front of the TV/VCR which is used to record video from anoth- er source.

Page 46 Page 48
Image 47
Page 46 Page 48
Contents CCZ252AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents TV/VCR Maintenance Before Using the TV/VCRPutting Batteries in the Remote Control Using the Remote ControlRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Crooked Pin Straight Pin Hooking Up the TV/VCR cont’dSelect another channel Turning On the TV/VCRGuage Language SelectionPress the Menu button Press the Number 1 button to choose Select LANInput Cable Exit PRIM. Setup VCR Program VCR Setup Caption Automatic Channel SetupPress the Number 3 button to select ADD/DELETE Channel Adding/Deleting ChannelsPress the Number 6 button to select SET Clock Setting the ClockManual Clock Setting Press the Number 2 button to select SET Manual Clock Setting the Clock cont’dAutomatic PBS Channel Selection Auto Press the Number 1 button to select SET PBS CHManual PBS Channel Selection Find the time UALDaylight-Saving Time Press the STATUS/EXIT button twice Time ZonePress the Number 4 button to select SET Time Zone Front Panel ANTenna Jack Antenna Hole Rear PanelRemote Control Buttons Mute Button Volume / ButtonsALT. CH Alternate Channel Button Channel / ButtonsAdjusting the Picture Controls Softer Adjusting the Picture Controls cont’dDecrease Increase More brilliantOn-Screen Status Displays On ModeCounter only Mode OFF ModeREMINDER.1 Press the PLAY/ button or the STOP/ button to selectPlaying To stop recording, press the STOP/ button Tape Speeds Press the RECord/OTR button once to start recordingOTR One-Touch RecordingDifferent brands of equipment may operate differently Rerecording Tape DuplicationSelect a once, daily or weekly recording Timer RecordingTime OFF To Correct Press Clear To END Press Exit Timer Recording cont’dPlease see page 48 for more Helpful Hints Checking or Clearing Timer Recordings Record Defeat Record DefeatPress the Number 4 button so that on appears beside Setting the Sleep Timer CAPTION1 Closed CaptionCaption Standard Closed Captions Closed Caption cont’dVolume Bar Repeat Play Repeat PlayPress the Number 2 button so that on appears beside Insert a tape in the TV/VCR Press the Menu button B Repeat PlayRepeat Play cont’d While the counter remains on-screen, press the Clear Button to reset the real-time counter to zeroReal-Time Counter Memory Automatic Operation Features Viewing a Still Picture Playback OptionsForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPGlossary SpecificationsHelpful Hints Helpful Hints cont’d TV/VCR Combination Limited WarrantyIndex Supplied Accessories
Top Page Image Contents