CCZ252comb.QX33 4/6/99 8:50 PM Page 44
44 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on-screen.
01:08 PM | STOP | |
CH10 | | |
SLP | 1 : 23 : 45 | |
3 | | 4 |
While the counter remains on-screen, press the CLEAR |
button to reset the real-time counter to zero. |
| 0 : 00 : 00 | 2 |
4
While the counter remains on-screen, press the MEMO- RY button so that M appears on-screen. To erase a real- time counter memory, press the MEMORY button so that the M disappears from the screen.
1,5
POWER | | | SLEEP |
| 2 | 3 | ALT.CH |
1 | |
4 | 5 | 6 | o |
| | | CHANNEL |
7 | 8 | 9 | p |
| 0 | +100 | o |
SPEED | | MUTE | VOLUME |
| |
| | | p |
| o | |
| PLAY | |
REW | | F.FWD |
| STOP | |
| p | |
REC/OTR | MEMORY | PAUSE/STILL |
| | | o |
MENU | STATUS/EXIT | CLEAR | TRACKING |
|
p
3
M 0 : 00 : 00
5
To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/ s button or the F.FWD/ B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/o button to watch the tape.
Helpful Hints
•The real-time counter memory will not function during Repeat Play mode. Details are on page 41.
•You may only set one real-time counter memory at a time. If you try to set the real-time counter to zero at a second location, the previ- ous real-time counter to zero setting will be lost.