CCZ130comb 4/5/99 7:32 PM Page 30
30 One-Touch Recording
The
Before you begin, make sure:
●Channels are set up.
●There is a tape in the TV/VCR. The record tab must be intact.
4 Press the STOP/EJECT but- ton on the TV/VCR to stop the OTR.
1
Use the CHANNEL o/p buttons or the Number buttons to select the channel you want to record.
2
Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears
3
POWER MENU STATUS/EXIT CLEAR
1 2 3 MEMORY
4 5 6
7 8 9 CHANNEL
| 0 | +100 | ALT.CH |
|
|
| SLEEP |
VOLUME | MUTE |
| SPEED |
REW/SEARCH |
| PLAY/ | FF/SEARCH |
1
2
Press the REC(ord)/OTR button repeatedly until the | 3 |
| REC/OTR |
| STOP/ PAUSE/STILL | |||
|
|
|
|
| ||||
desired recording length appears in the upper right corner of the |
|
|
|
|
| |||
|
|
|
|
| ||||
screen. Recording will begin immediately. The RECORD light will |
|
|
|
|
| |||
|
|
|
| |||||
appear. |
|
|
|
|
|
|
|
|
OTR |
| LENGTH 0:30 |
|
|
|
|
|
|
CH12 |
|
|
|
|
|
|
|
|
LENGTH | : | PRESS OTR |
|
|
|
|
|
|
CANCEL | : | PRESS CLEAR |
|
|
|
|
|
|
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.
Helpful Hints
•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.
•You cannot record if RECORD DEFEAT is set to ON. Details are on page 36.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.