CCZ130comb 4/5/99 7:32 PM Page 33
Timer Recording (cont’d) 33
4
Use the Number buttons (1 - 8) to select a position in which to store the timer recording. Flashing numbers indi- cate an open position (one in which a timer recording has not yet been stored).
NOTE: If you select a number that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear
5
●Enter the channel of the TV program you want to record (you must enter a 0 before all
●If you are recording from line input, press 0, 0. A/V IN will appear
●If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL | 10 |
TIME ON | – |
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Follow the instructions in step 6 to set the recording’s stop time. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL | 10 |
TIME ON | 09:30 PM |
TIME OFF | – |
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Instructions continue on page 34.
POWER MENU STATUS/EXIT CLEAR
1 2 3 MEMORY
4 5 6
7 8 9 CHANNEL
| 0 | +100 | ALT.CH |
|
|
| SLEEP |
VOLUME | MUTE |
| SPEED |
REW/SEARCH |
| PLAY/ | FF/SEARCH |
REC/OTR |
| STOP/ | PAUSE/STILL |
Helpful Hints
•If the numbers entered do not match the TV/VCR’s calendar, the entry will be rejected and a question mark will appear
•To make corrections while you are programming a timer recording, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the cor- rect information.