Magnavox CCZ196AT owner manual Timer Recording With the VCR Plus+ Programming System

Page 41

CCZ196comb.QX33 4/6/99 7:05 PM Page 41

Timer Recording With the VCR Plus+ Programming System 41

Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:

●The clock has been set. If not, CLOCK MUST BE SET appears.

●Channels are programmed.

●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).

●You have completed the steps on pages 39-40.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.

POWER

 

EJECT

SLEEP

SPEED

MEMORY

REC/OTR

 

PAUSE/STILL

 

PLAY

 

3

REW

STOP

F.FWD

MENU

STATUS/EXIT

CLEAR

 

1

Press the COMBI button, then press the VCR PLUS+/ENTER button.

VCR PLUS+ PROGRAM

PLUS CODE : – – – – – – – –

TO END PRESS EXIT

2

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program, and it can be three to eight digits long). Finally, press the VCR PLUS+/ENTER button.

VCR PLUS+ PROGRAM

PLUS CODE : 95557 – – –

TO SET PRESS VCR +

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record every day from Monday to Friday

– starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.

VCR PLUS+ PROGRAM

>ONCE

DAILY (MON - FRI)

WEEKLY

SELECT ▲▼ CHOOSE B

TO END PRESS EXIT

 

1

2

3

 

 

 

4

5

6

CH.

2

 

 

 

7

8

9

 

1

A.CH

0

+100

VOL.

CABLE/DBS

COMBI

 

 

 

 

VCR PLUS+

 

 

VAR.SLOW

/ENTER

MUTE

 

TRACKING

F.ADV

SLOW

 

 

SMART

SMART

SKIP INDEX

 

 

 

PICTURE

SOUND

SEARCH SEARCH

 

 

Helpful Hints

•If the timer recording will occur on a Saturday or Sunday, you cannot select DAILY at step 3. ERROR may flash on the screen after you com- plete step 3. Select ONCE or WEEK- LY instead.

•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 43.

•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 43.

•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.

•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents CCZ196AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Before Using the TV/VCRUsing the Remote Control VCR MaintenanceHooking Up The TV/VCR Hook up your TV/VCR using one of the connections shownOn the Cable Box and to theOUTIN ANTenna Jack on the TV/VCR Rod AntennaUse a Video cable to connect the Video Hooking Up The TV/VCR cont’dOUT Jack on the VCR to the Video Jack on the rear of the TV/VCRPress the Menu button. The screen shown below will appear You cannot set up channels if you are using a Cable BoxTurning On the TV/VCR Press the STATUS/EXIT button Language SelectionPress the Combi button, then press the Menu button Wait for the TV/VCR to set up channels Automatic Channel SetupPress the PLAY/ button or the STOP/ button to select Adding/Deleting ChannelsProgramming of the channel you added or deleted will appear Press the STATUS/EXIT button once or twiceManual Clock Setting Setting the ClockMonth To Correct Press Clear To END Press Exit Setting the Clock cont’dAutomatic PBS Channel Selection Manual PBS Channel Selection Wait for the TV/VCR to find the timeManual PBS Channel Selection NOW Searching flashes on the TV/VCR screen Daylight-Saving Time Time Zone Within 30 seconds, press the CABLE/DBS button Setting the Remote to Operate a Cable Box/DBSPress the Mute button Setting the Remote to Operate a Cable Box/DBS cont’d Front Panel Rear Panel Remote Control Buttons PAUSE/STILL Button VOLume. Up/Down ButtonsMemory Button REWind/ ButtonMore brilliant Adjusting the Picture ControlsMore purple SofterSmart Picture If another remote control beeps If another remote control beepsRemote Locator Press the Mute button, then press the PAUSE/STILL buttonIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFIf you select Status OFF ChannelReminder ReminderInsert a tape in the TV/VCR PlayingGiven below RecordingRecording options are on pages 33 Distortion may appear on the tapePress the STOP/EJECT but Ton on the TV/VCR to stop the OTR One-Touch RecordingAudio and video cables are not included Different brands of equipment may operate differentlyDaily Timer RecordingRect information Timer Recording cont’dFriday TimeChecking or Clearing Timer Recordings Station Setting Up the VCR Plus+ Programming SystemTV Channels Setting Up the VCR Plus+ Programming System cont’d You have completed the steps on pages Timer Recording With the VCR Plus+ Programming SystemTimer Recording With the VCR Plus+ Programming System cont’d Follow the steps below to prevent accidental recording Defeat RecordingIf the power fails, you might lose Sleep timer setting Setting the Sleep TimerExample Closed CaptionMenu ScreenHalf-screen text Closed Caption cont’dStandard Closed Captions To turn Smart Sound On or Off To set the Volume BAR to on or OFFSmart Sound Mode Repeat PlayRepeat Play Instructions continue on00000 B Repeat Play cont’dAppear on-screen Press the STATUS/EXIT button. The real-time counter willTape in the TV/VCR Index SearchAutomatic Operation Features Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still PictureSpecifically… MTS Broadcast Stereo SystemUnderstanding On-Screen Displays MTS Broadcast Stereo System cont’d Glossary SpecificationsHelpful Hints Helpful Hints cont’d Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Above One-touch recording Adding Table of contents Deleting Rewind, power offSetup PowerCCZ196comb.QX33 4/6/99 705 PM CCZ196comb.QX33 4/6/99 705 PM Supplied Accessories
Top Page Image Contents