Magnavox CCZ196AT owner manual Automatic Operation Features

Page 53

CCZ196comb.QX33 4/6/99 7:05 PM Page 53

Automatic Operation Features 53

The following playback features will always operate.

Automatic Playback

When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. If a real-time counter memory is set, the TV/VCR will only rewind the tape to the point at which the counter was set to zero, then stop. The TV/VCR will not turn itself off or eject the tape.

Memory Rewind, Power Off

When the POWER button is pressed while the TV/VCR is rewind- ing a tape, REW → POWER OFF will appear on-screen. The TV/VCR will turn itself off when the tape has finished rewinding.

If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.

Tape Eject

A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment

The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually during tape playback, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING o/p buttons on the remote control.

Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.

Before	After
Tracking	Tracking
Adjustment	Adjustment

Image 53

Contents CCZ196AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Before Using the TV/VCRUsing the Remote Control VCR MaintenanceHooking Up The TV/VCR Hook up your TV/VCR using one of the connections shownOn the Cable Box and to theOUTIN ANTenna Jack on the TV/VCR Rod AntennaUse a Video cable to connect the Video Hooking Up The TV/VCR cont’dOUT Jack on the VCR to the Video Jack on the rear of the TV/VCRPress the Menu button. The screen shown below will appear You cannot set up channels if you are using a Cable BoxTurning On the TV/VCR Press the STATUS/EXIT button Language SelectionPress the Combi button, then press the Menu button Wait for the TV/VCR to set up channels Automatic Channel SetupPress the PLAY/ button or the STOP/ button to select Adding/Deleting ChannelsProgramming of the channel you added or deleted will appear Press the STATUS/EXIT button once or twiceManual Clock Setting Setting the ClockMonth To Correct Press Clear To END Press Exit Setting the Clock cont’dAutomatic PBS Channel Selection Manual PBS Channel Selection Wait for the TV/VCR to find the timeManual PBS Channel Selection NOW Searching flashes on the TV/VCR screen Daylight-Saving Time Time Zone Within 30 seconds, press the CABLE/DBS button Setting the Remote to Operate a Cable Box/DBSPress the Mute button Setting the Remote to Operate a Cable Box/DBS cont’d Front Panel Rear Panel Remote Control Buttons PAUSE/STILL Button VOLume. Up/Down ButtonsMemory Button REWind/ ButtonMore brilliant Adjusting the Picture ControlsMore purple SofterSmart Picture If another remote control beeps If another remote control beepsRemote Locator Press the Mute button, then press the PAUSE/STILL buttonIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFIf you select Status OFF ChannelReminder ReminderInsert a tape in the TV/VCR PlayingGiven below RecordingRecording options are on pages 33 Distortion may appear on the tapePress the STOP/EJECT but Ton on the TV/VCR to stop the OTR One-Touch RecordingAudio and video cables are not included Different brands of equipment may operate differentlyDaily Timer RecordingRect information Timer Recording cont’dFriday TimeChecking or Clearing Timer Recordings Station Setting Up the VCR Plus+ Programming SystemTV Channels Setting Up the VCR Plus+ Programming System cont’d You have completed the steps on pages Timer Recording With the VCR Plus+ Programming SystemTimer Recording With the VCR Plus+ Programming System cont’d Follow the steps below to prevent accidental recording Defeat RecordingIf the power fails, you might lose Sleep timer setting Setting the Sleep TimerExample Closed CaptionMenu ScreenHalf-screen text Closed Caption cont’dStandard Closed Captions To turn Smart Sound On or Off To set the Volume BAR to on or OFFSmart Sound Mode Repeat PlayRepeat Play Instructions continue on00000 B Repeat Play cont’dAppear on-screen Press the STATUS/EXIT button. The real-time counter willTape in the TV/VCR Index SearchAutomatic Operation Features Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still PictureSpecifically… MTS Broadcast Stereo SystemUnderstanding On-Screen Displays MTS Broadcast Stereo System cont’d Glossary SpecificationsHelpful Hints Helpful Hints cont’d Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Above One-touch recording Adding Table of contents Deleting Rewind, power offSetup PowerCCZ196comb.QX33 4/6/99 705 PM CCZ196comb.QX33 4/6/99 705 PM Supplied Accessories