10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
POWER | SLEEP |
>PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
2
PRESS B
1
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
1 | 2 | 3 |
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
>SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
VOLUME BAR | [ON] |
SET CLOCK |
|
SELECT KL CHOOSE B
TO END PRESS EXIT
4 | 5 | 6 | CH. |
| |||
7 | 8 | 9 |
|
| 0 | ALT. CH | VOL. |
|
| ||
SPEED | MEMORY | PAUSE/STILL |
|
REC/OTR | TRACKING | MUTE |
3
Press the PLAY/▲ button or the STOP/▼ button to select |
|
AUTO PROGRAMMING, then press the F.FWD/B but- |
|
ton. AUTO CH PROGRAMMING ... will appear on the screen. |
|
The TV/VCR distinguishes between TV channels and cable chan- | Wait for the TV/VCR to set up |
| |
nels automatically, and the TV/VCR will memorize its available | 4 channels. |
4 |
|
Wait for a few minutes. When setup is complete, CHANNELS |
|
ARE SET will appear on the screen. Then the programming of the |
|
lowest channel number placed in the TV/VCR’s memory will |
|
appear on the screen. Now, when you press the CH(annel) m/n |
|
button, you will scan only through channels you receive. |
|
Helpful Hint
•Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.