Magnavox CCA252AT99 owner manual Turning On the TV/VCR

Page 8

8 Turning On the TV/VCR

Before you turn on the TV/VCR, make sure batteries are in the remote control and the TV/VCR is hooked up correctly.

The instructions on this page work only when you turn on the TV/VCR for the first time.

1

Press the POWER button. The TV/VCR will come on and the screen shown below will appear.

SELECT LANGUAGE

> ENGLISH

ON

ESPAÑOL

SELECT KL OR

PRESS MENU TO CONTINUE

2

Press the PLAY/K button or the STOP/L button to select

English or Spanish on-screen displays and menus.

3

Press the MENU button. The screen shown below will appear.

CONNECT ANTENNA OR CABLE

TO TVCR

THEN PRESS B

TO END PRESS EXIT

4

Press the F.FWD/B button to begin automatic channel setup. The TV/VCR will memorize all available channels. When channels are set, CHANNELS ARE SET will appear on the screen briefly. Then the TV/VCR will go to the lowest channel pro- grammed.

(If you try to set up channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on the screen. Connect an antenna or cable to the ANT(enna) jack on the TV/VCR, then press the F.FWD/B button again. You may need to follow the steps on page 10 instead.)

5

Use the CH(annel) m/n button or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) m/nbutton to adjust the sound.

1

POWER

 

 

 

SLEEP

 

2

 

PLAY

 

 

4

REW

STOP

 

F.FWD

3

MENU

STATUS/EXIT

CLEAR

 

1

2

 

3

 

 

 

4

5

 

6

CH.

 

5

 

 

 

7

8

 

9

 

 

 

0

ALT. CH

VOL.

 

 

 

 

SPEED MEMORY

PAUSE/STILL

 

 

REC/OTR

TRACKING

 

MUTE

 

Helpful Hints

•If you do not see any on-screen dis- plays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine-10 to select a language and set up channels.

•To skip step 2, press the MENU button. All on-screen displays will be in English. To skip step 4, press the STATUS/EXIT button. Channels will not be set up, and CHANNELS NOT SET will appear on the screen briefly.

•You cannot set up channels if you are using a Cable Box.

•Line Input mode will always be stored in the TV/VCR’s memory as channel 00. When you select chan- nel 00, A/V IN will appear on the screen briefly. Press the CH(annel) m/n button or the Number but-

tons to select another channel.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents
CCA252AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Philips Consumer Electronics Company recommends thatTable of Contents Putting Batteries in the Remote Control Using the Remote Control TV/VCR Maintenance Erasure PreventionRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Hooking Up the TV/VCR cont’d Crooked Pin Straight PinYou cannot set up channels if you are using a Cable Box Turning On the TV/VCRLanguage Selection Press the Menu buttonAutomatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to selectCable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionSET Auto Clock Please Wait Several Minutes Manual PBS Channel Selection Use the Number buttons to select your PBS station Press the PLAY/ button or the STOP/ button toSelect SET PBS CH. MANUAL. Then, press the F.FWD/B Daylight-Savings Time Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Remote Control Buttons STOP/ Button REWind/ ButtonSTATUS/EXIT Button Menu ButtonAdjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseMore brilliant SofterOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFPress the PLAY/ button or the STOP/ button to select ReminderPlaying Recording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording OTRRerecording Tape Duplication Different brands of equipment may operate differentlyTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings With the TV/VCR on, press the Menu buttonVCR PROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B buttonDefeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonRepeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-BReal-Time Counter Memory Press the STATUS/EXIT button. The real-time counter willPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureSmartLock SmartLock cont’d Example Specific RatingsTo change the access code, follow these steps Rating Explanations Blue Background GroundSleep Timer Closed Caption ExampleMenu ScreenClosed Caption cont’d Half-screen textVolume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Limited Warranty TV/VCR CombinationDeleting Reviewing Setup IndexPage Page Supplied Accessories
Top Page Image Contents