Magnavox CCA252AT99 owner manual Timer Recording cont’d

34 Timer Recording (cont’d)

8

Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time.

ONE TIME PROGRAM

SP=1 SLP=2

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

9

Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, 1999, press 07, 10. The day of the week and the year will be displayed automatically. (You cannot program the TV/VCR to record more than one year in advance.)

ONE TIME PROGRAM

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

10

Press the STATUS/EXIT button. PROGRAM WAS COM- PLETED PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen.

●If there is not a tape in the TV/VCR, PLEASE INSERT CAS- SETTE also appears on the screen.

●If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears on the screen. If this hap- pens, insert a different tape.

●If PROGRAM NOT COMPLETED appears, start again at step 1.

11

Press the POWER button to turn off the TV/VCR power. The RECORD light will flash slowly. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording starts.

11 10

Turn off the TV/VCR

for the recording.

Insert a tape in

the TV/VCR.

Leave the Cable

Box/DBS on

(if applicable).

Helpful Hints

•PROGRAM NOT COMPLETED / CLASH may appear on the screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out.

•To stop a started timer recording, press the STOP/EJECT button on the TV/VCR.

Please see page 54 for more

Helpful Hints.