Use the sleep timer to program the TV/VCR to shut off in a cer- tain amount of time.
1
Press the SLEEP button. The sleep timer display will appear on the screen. (You can not set the sleep timer during a recording.)
SLEEP 0 MIN
2
Within five seconds, press the SLEEP button repeatedly to select 30 minutes, 60 minutes, 90 minutes, or 120 min- utes. In a few seconds, the display will disappear. Then the TV/VCR will shut itself off after the specified amount of time. One minute before the TV/VCR shuts itself off, the seconds will count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds before the TV/VCR shuts itself off.
SLEEP 10 SEC
GOOD NIGHT
●To see how much time remains until the TV/VCR shuts itself off, press the SLEEP button once. The time remaining will appear on the screen briefly. You cannot do this during a recording.
●To cancel a sleep timer setting, press the SLEEP button until 0 MIN appears on the screen. The
Sleep Timer 47
POWER | SLEEP |
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
1 | 2 | 3 |
|
4 | 5 | 6 | CH. |
| |||
7 | 8 | 9 |
|
| 0 | ALT. CH | VOL. |
|
| ||
SPEED | MEMORY | PAUSE/STILL |
|
REC/OTR | TRACKING | MUTE |
Helpful Hints
•Finish all recordings before the TV/VCR shuts itself off. If a record- ing is in progress, the sleep timer will be cancelled.
•A timer recording will not begin unless the TV/VCR power is off. Two minutes before a timer record- ing starts, PLEASE TURN OFF FOR TIMER RECORDING flashes on the screen. If you see this message, turn off the TV/VCR.
•If the power fails, you might lose
the sleep timer setting.