Graco 256273(HM), 24M224(HP) important safety instructions Skin Injection Hazard

Page 4

Warnings

WARNING

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not point gun at anyone or at any part of the body.

Do not put your hand over the spray tip.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Do not spray without tip guard and trigger guard installed.

Engage trigger lock when not spraying.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

Always wear impervious gloves when spraying or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

4

313259D

Image 4
Contents Important Safety Instructions Hopper or Hose Heat Circulation KitContents Related ManualsFire and Explosion Hazard Skin Injection Hazard Heated Hopper or Hose Circulation Kit Single Hose Assembly Dual Hose AssemblySingle Hose Assemblies Hazardous Location Heaters Dual Hose AssembliesNon-hazardous Location Heaters Heated Hopper or Hose Circulation Kit 313259D Typical Installation Heat Only Hoppers Configuration KeySide-Mounted Hoppers SM Back-Mounted Hoppers BMBM Hoppers SM Hoppers Section Tubing Hoppers and Heated Hose Configuration Key Fluid schematic for heating hoppers and heated hose Heated Hose Only Configuration Key Heated Water Fluid FlowFluid schematic for heated hose Single Hose ShownInstallation GroundingXM Heated Hose Only XM All Others XM Kit For heating heated hose only For heating hoppers onlyFor heating hoppers and heated hose Operation Maintenance TroubleshootingDo not overfill when using oil. See overfilling notice on Problem Cause Solution256273, XM Heated Hopper or Hose Circulation Kit PartsFor heating hoppers and heated hose 30 29 Heater and Diaphragm Pump 3 Connections For heating heated hose onlyFor heating hoppers or hoppers and heated Hose onlyPart Description Qty Ring24M224, XP Heated Hopper or Hose Circulation Kit Hose Identification Technical Data Technical Data 313259D Graco Standard Warranty Graco Information