Programming your Home Theater System

VIZIO XVT472SV User Manual

1.Turn on the home theater system.

2.Press and release the AUDIO button on the VIZIO universal remote control.

3.Press and hold SET until the LED flashes twice.

4.Find the programming code for your home theater system in the code list below and enter it using the number buttons. If the code is accepted, the LED flashes twice after the last digit is entered. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed.

5.Point the VIZIO universal remote control at the Home Theater System and press POWER. The Home Theater System will turn off. If the Home Theater System does not turn off, repeat Steps 2 through 4 with the next code listed for the device and manufacturer.

Notes:

∙If the codes do not work or your brand is not listed, see “Searching for Device Codes.”

∙Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.

Programming your Cable or Satellite Set-Top Box

1.Turn on the Cable or Satellite Set-Top Box.

2.Press and release CABLE on the VIZIO universal remote control.

3.Press and hold SET until the LED flashes twice.

4.Find the programming code for your Cable or Satellite Set-Top Box in the code list below and enter it using the number buttons. If the code is accepted, the LED flashes twice after the last digit is entered. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed.

5.Point the VIZIO universal remote control at the Cable or Satellite Set-Top Box and press POWER. The Cable or Satellite Set-Top Box will turn off. If the Cable or Satellite Set-Top Box does not turn off, repeat Steps 2 through 4 with the next code listed for the device and manufacturer.

Notes:

∙If the codes do not work or your brand is not listed, see “Searching for Device Codes.”

∙Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.

Searching for Device Codes

If you cannot find the manufacturer in the device list or the program code does not work, you can use the remote control to search for the correct device code.

1.Turn on the device.

2.Press the matching device button on the VIZIO remote control.

3.Press and hold the SET button until the LED flashes twice.

4.Press 9 9 1. The LED flashes twice.

5.Point the VIZIO universal remote control at the device and then press and hold Power until the device turns off. The LED flashes twice.

Reset Remote to Factory Settings

1.Press and hold SET until the LED flashes twice.

2.Press 9 1 9 1 9. The LED flashes twice.

Version 12/1/2009	51
	www.VIZIO.com