Basic setup (VCR)
Setting the video channel | Setting the language |
When a TV is connected with the 75 ohm coaxial cable only.
To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR’s channel selector, the TV must be set to channel 3 or 4 (video channel).
You can choose from three different languages (English, French and Spanish) for the
Setting the video channel
1 Press and hold 3 or 4 on the remote control for 3 seconds in standby mode.
•The video channel will start to flash for 3 seconds in the display window.
2 Press POWER to turn on the DVD/VCR.
3 Press VCR DVD selector to select the VCR mode.
•The VCR mode indicator will light at the right of the display window.
4 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.
5 Press TV/VCR to select the VCR position.
•The VCR indicator will appear at the upper left of the display window.
6 Selectarea. any channel to receive a TV station in your The channel number will appear on the screen for about 4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, playback a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner’s manual for details.
Note:
If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player’s operation. Disconnect the AC power cord once, then connect it again.
Setting the language
Preparation:
• Turn ON the TV and select to the corresponding video input.
• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)
1 Press VCR MENU.
• The VCR menu screen will appear. Press SET + or
– to select “SYSTEM SETUP”, then press ENTER. If you use the unit for the first time, press VCR MENU, instead of the “SYSTEM SETUP” menu screen of the main menu screen in step 2 may appear.
MENU |
|
|
TIMER REC SET | ON | OFF |
AUTO REPEAT | ||
SAP | ON | OFF |
CH SETUP |
|
|
SYSTEM SETUP |
|
|
2 Press SET + or – to select “LANGUAGE”, then press
ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK 
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
3 Press SET + or – to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.
4 Press VCR MENU repeatedly until the menu screen is cleared.
Notes:
• Both the VCR and the DVD have their own player menus 41 .
• If no buttons are pressed for more than 60 seconds, the VCR MENU screen will return to normal
22
2K60121A.indb 22
1/12/2007 3:50:09 PM