Toshiba SD-V395KC owner manual Tuner setting, To set Daylight Saving Time, Manual clock setting

Press ENTER.

• Auto tuning will begin. The channel display will count up and when finished, the screen returns to normal.

Basic setup (VCR)

To set DAYLIGHT SAVING TIME

You can set the DAYLIGHT SAVING TIME automatically or manually.

1 Press VCR MENU.

Press SET + or – to select “SYSTEM SETUP”, then press ENTER.

2 Press SET + or – to select “DAYLIGHT SAVING TIME”, then press ENTER.

3 Press SET + or – to select one of the options, then press ENTER. Press VCR MENU until the MENU screen is cleared.

ON: for manual setting (forward one hour)

OFF: for manual setting (back one hour)

AUTO: for automatic setting (read XDS in the signal)

When you want to set the DAYLIGHT SAVING TIME manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.

Notes:

• When shipped from factory, the DAYLIGHT SAVING TIME is set to “AUTO” position.

• When the clock is not set, DAYLIGHT SAVING TIME setting is not available.

• When there is no DAYLIGHT SAVING TIME in your area, always select “OFF” position in step 3.

Manual clock setting

If the AUTO CLOCK process did not set the date and time correctly, you must set them manually for timer recording and

DAYLIGHT SAVING TIME.

1 Press VCR MENU.

2 Press SET + or – to select “SYSTEM SETUP”, then press ENTER.

3 Press SET + or – to select “CLOCK SET”, then press

ENTER.

4 Press SET + or – to set the month, then press

ENTER.

5 Set the day, year and time as in step 4.

6 After setting the clock, date and time starts functioning automatically.

To make corrections any time during the process Press CANCEL repeatedly until the item you want to change blinks, then press SET + or –.

Note:

After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/ VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

TV/CABLE selection

Preparation:

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

1 Press VCR MENU. Press SET + or – to select “CH SETUP”, then press ENTER.

2 Press SET + or – to select “TV/CABLE”.

3 Press ENTER to select the TV or CABLE mode.

• The arrow indicates the selected mode.

		CH SETUP
			TV CABLE
			AUTO CH MEMORY
			ADD/DELETE
TV	- VHF/UHF channels
CABLE	- Cable TV channels		+/–/ENTER/MENU

4 Press VCR MENU until the menu screen is cleared.

Note:

You can’t select “CH SETUP” if you set the channel to “L1” or “L2”.

Setting channels automatically

1 Repeat above step 1 and press SET + or – to select “AUTO CH MEMORY”.

2

24

2K60121A.indb 24

1/12/2007 3:50:10 PM