Toshiba SD-V395KC owner manual Playing a disc, Vcddvd Basic playback

• With the playback side down

• There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD/VCR to malfunction.

• Do not place a disc which is unplayable in this DVD/VCR.

• The disc tray opens.

• The DVD indicator will light.

• The DVD/VCR turns on.

Playback (DVD)

Playing a disc

This section shows you the basics on how to play a disc.

CAUTION

Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

■ About DVD VCD		CD
The	DVD VCD CD	icons on the heading bar show the
playable discs for the function described under that
heading.
DVD	: You can use this function with DVD video discs.
VCD	: You can use this function with Video CDs.
CD	: You can use this function with Audio CDs and
	CD-R/RW CDs.

VCDDVD Basic playback

Preparations:

• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This may include S-video or component video inputs which are exclusive to DVD playback.

• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD/VCR.

1 Press ON/STANDBY.

2 Press VCR/DVD to select the DVD mode.

3 Press OPEN/CLOSE.

4 Place a disc on the disc tray.

5 Press OPEN/CLOSE or PLAY on the unit.

The disc tray closes automatically.

On the TV-screen, “” changes to “Reading” and then playback commences.

•A menu screen will appear on the TV screen if the disc has a menu feature.

•Press ▲/▼/◀/▶ to select title, then press ENTER. Title is selected and play commences.

•To start playback in the stop mode, press PLAY. 6 Press STOP to end playback.

•The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

•If you press STOP again (“ ■ ” appears on the screen.), the unit will clear the stopped point.

32

■To pause playback (still mode) Press PAUSE/STEP during playback.

•To resume normal playback, press PLAY.

•The sound is muted during still mode.

■To remove the disc Press OPEN/CLOSE.

•Remove the disc after the disc tray opens completely.

Be sure to press OPEN/CLOSE to close the disc tray after you remove the disc.

■Playing a Disc while the VCR section is recording or standing by for timer recording

1)Start to record.

Follow steps 1~5 on page 28 .

•If the DVD/VCR is standing by for recording, turn on the DVD/VCR.

2)Press VCR DVD selector to select DVD mode.

3)Play a disc.

Follow steps 3 ~ 5 on the left.

•Press PLAY if the DVD/VCR does not start to play a disc automatically.

4)Stop playback.

Press STOP to stop playing a disc.

■Screen saver function

The screen saver operates when you leave the unit in DVD stop mode for approx. five minutes.

The DVD VIDEO logo moves randomly on the screen. Please press any button when you want to return to an usual screen.

To turn on or off the screen saver, see page 42 .

Notes:
•	If the unit does not operate property: Static electricity, etc., may
	affect the player’s operation. Disconnect the AC power cord
•	once, then connect it again.
	Occasionally, some picture noise not usually visible on the TV
	screen during a normal broadcast may appear while playing a
	DVD video disc. It is because due to high resolution pictures
	on these discs which include a lot of information. The amount
	of noise depends on the disc you use with this unit.You should
	generally reduce the sharpness adjustment on your TV when
•	viewing DVD video discs.
	If a non-compatible disc is loaded, “Incorrect Disc”, “Region
	Code Error” or “Parental Error” will appear on the TV screen
	according to the type of loaded disc. In this case, check your
•	disc again 8	42 .
	Some discs may take a minute or so to start playback.
•	When you set a single-faced disc label downwards (i.e. the
	wrong way up) and press OPEN/CLOSE or PLAY on the unit,
	“Reading” will appear on the display for a few minutes and then
•	“Incorrect Disc” will continue to be displayed.
	Some discs may not work the resuming facility.
•	Resuming cannot function when you play a PBC-featured Video
•	CD while the PBC is on. To turn off the PBC, see page 36 .
	Some playback operations of DVDs may be intentionally fixed by
	software producers. Since this unit plays DVDs according to the
	disc contents the software producers designed, some playback
	features may not be available. Also refer to the instructions
•	supplied with the DVDs.
	Do not move the unit during playback. Doing so may damage the
•	disc.
	Use the OPEN/CLOSE to open and close the disc tray. Do not
	push the disc tray while it is moving. Doing so may cause the unit
•	to malfunction.
	Do not push up on the disc tray or put any objects other
	than discs on the disc tray. Doing so may cause the unit to
•	malfunction.
	In many instances, a menu screen will appear after playback of
	a movie is completed. Prolonged display of an on-screen menu
	may damage your television set, permanently etching that image
	onto its screen. To avoid this, be sure to press POWER on your
•	remote control once the movie is completed.
	There may be a slight delay between the button is pressed and
	the function activates.

2K60121A.indb 32

1/12/2007 3:50:14 PM