Toshiba SD-V395KC Recording a DVD/CD disc, Duplicating a video tape, Second Audio Program SAP

Second Audio Program (SAP)

Second Audio Program (SAP)

Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

1 Press“SAP”.VCR MENU. Then press SET + or – to select

2 Press ENTER to select “ON”.

•Then press VCR MENU until the menu screen is cleared.

Listening to SAP

When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen

for about 4 seconds. This means that the “Second Audio Program” broadcasting is available.

Notes:

• When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

• When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cable not connected), the sound will be monaural.

Connection with second VCR

Playback VCR

		LINE IN 2
		To VIDEO
To VIDEO OUT		IN
		To AUDIO (L) IN	To AUDIO
To AUDIO (L) OUT
			(R) IN
To AUDIO (R) OUT
	AUDIO/VIDEO cable (not supplied)
Connection with Camcorder
Playback Camcorder			LINE IN 2
To AV Jack		To VIDEO
		IN
		To AUDIO (L) IN To AUDIO
			(R) IN
	AUDIO/VIDEO cable (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

Recording a DVD/CD disc

You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR.

Other functions (VCR)

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

Duplicating a video tape

Preparation:

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

• Load a cassette tape with the erase prevention tab intact.

• Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SP/SLP to select the desired tape speed SP or SLP.

•It is recommended to set the tape speed to the SP mode on the recording VCR for best results.

2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.

• “L1” or “L2” will appear on the display.

L1: on the rear panel L2: on the front panel

3 Press PLAY on the playback VCR or Camcorder.

4 Press REC/OTR on the recording VCR.

• The duplicating process begins.

5 Press STOP when you finish duplicating.

Duplicating a DVD or CD disc

Preparation:

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

• Load a cassette tape with the erase prevention tab intact.

• Load a DVD/CD disc.

1 Press SP/SLP to select the desired tape speed SP or SLP.

2 Press VCR DVD selector to select the DVD mode.

• The DVD mode indicator will light.

3 Press PLAY to start playback.

4 Press REC/OTR to start recording.

•The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape.

5 Press STOP when you finish recording.

•If you wish to stop a DVD/CD disc, press VCR DVD selector to change the DVD mode, then press STOP.

Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
• When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
“ ” on the display window will flash.
• You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.	31
DISC IS COPY PROTECTED

2K60121A.indb 31

1/12/2007 3:50:13 PM