Toshiba SD390EKB manual Connecting to a Digital AV Receiver, Connecting the power cord

Connections

Connecting to a Digital AV Receiver

English

Receiver has a PCM, Dolby Digital or MPEG decoder

ASelect one of the video connections (CVBS VIDEO IN, SCART IN or HDMI IN) depending on the options available on your TV.

BConnect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

CSet the DVD Player' s Digital Output to PCM or All depending on the capabilities of your Receiver (see page 19 {Digital Output}).

Tip:

-If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Connecting the power cord

(Illustration of SD390EKB)

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.