DVD Menu Options
English
Brightness |
| 0 |
Contrast | 0 | |
Tint |
| 0 |
Color |
| 0 |
Close
DPress / to highlight one of the following options.
Brightness
Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting.
Contrast
Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast.
Tint
Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.
Color
Increase the value to enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour.
EPress / to adjust the setting that best suits your personal preference.
FRepeat steps D~ E to adjust your picture preference.
GPress / to select ＇Close＇ and press OK to confirm.
HD Resolution
The video output of the DVD player can be selected as “Auto”, “480p/576p”, “720p”, “1080i” or “1080p”.
AIn ' Video ', press / to select { HD Resolution }, then press .
BUse / to select a setting and press OK to confirm.
Tip:
If the Video Output mode is not set to"HDMI", you cannot select the “HD Resolution”.
JPEG Interval
You can continuously playback all JPEG files automatically. Set “JPEG Interval” to “5 Seconds”, “ 10 Seconds” or “15 Seconds”.
AIn ' Video ', press / to select { JPEG Interval }, then press .
{ Off }
Plays back one file at a time.
{5 Seconds }
Plays back images in the form of a slide show at 5 seconds intervals.
{10 Seconds }
Plays back images in the form of a slide show at 10 seconds intervals
{15 Seconds }
Plays back images in the form of a slide show at 15 seconds intervals
BUse / to select a setting and press OK to confirm.
Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.
Using the Audio setup menu
APress SETUP on the remote control. The system setup menu appears.
Language | Digital Output | : PCM |
| Night Mode | : Off |
Video | Down Sampling | : On |
| 3D Effects | : Off |
Audio |
|
|
Rating
Misc
BPress / to select { Audio }, then press .
CPress / to select an item, then press to access.
Example: { Night Mode }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse / to select a setting and press OK to confirm.
Example: { On }
The setting is selected and setup is completed.
ETo exit, press SETUP.
Digital Output
Select this if you connect to a multichannel decoder/ receiver.
AIn 'Audio', press / to select { Digital Output }, then press .
{ All }
Select this if the connected device has a
{PCM }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital signal to PCM (Pulse Code Modulation).
{Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT jacks to connect to a TV or stereo system.
BUse / to select a setting and press OK to confirm.
Tip:
Night Mode
This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
AIn ＇ Audio＇, press / to select { Night Mode }, then press .
{ On }
Select this to set low volume output. This feature is only available for movie discs with Dolby Digital
mode.
19