DVD Menu Options
Using the Video setup menu
APress SETUP on the remote control. The system setup menu appears.
Language | Aspect Ratio | : 4:3 |
| View Mode | :Auto Fit |
Video | TV System | : NTSC |
| Video Out | :RGB |
Audio | Smart Picture | :Standard |
| HD Resolution | :Auto |
Rating | JPEG Interval | :5 Seconds |
Misc
BPress / to select { Video }, then press
CPress / to select an item, then press to access.
Example: { Video Out }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse / to select a setting and press OK to confirm.
Example: { RGB }
The setting is selected and setup is completed.
ETo exit, press SETUP.
Aspect Ratio
The picture shape can be adjusted to fit your TV and the format must be available on the playback disc. Otherwise, the TV display will not affect the picture during playback.
AIn ' Video ', press / to select {Aspect Ratio }, then press .
{ 4:3 }
Select this if you have a normal TV. A
will be displayed on the TV screen.
{16:9 }
Select this for
BUse / to select a setting and press OK to confirm.
View Mode
Use view mode to scale an image that fits to the TV screen's width and height.
AIn ' Video ', press / to select { View Mode }, then press .
{ Fill }
Fill the screen with decoded image.
{Original }
Display image as its original size.
{Height Fit }
Fit the screen height with image height.
{Width Fit }
Fit the screen width with image width.
{Auto Fit }
Automatically display the decoded image on screen
at a suitable size.
{Pan Scan }
Automatically display decoded image on full screen
without distortion.
Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.
BUse / to select a setting and press OK to confirm.
Tip:
TV System
The video standard of the DVD player output can be selected from “NTSC”, “PAL” or “Multi”.
{NTSC }: Select if your TV system is NTSC.
{PAL }: Select if your TV system is PAL.
{Multi }: The DVD video player automatically identifies PAL or NTSC video system of a disc. Connect a multisystem TV (PAL/NTSC compatible) to view a picture.
A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc. For the case of Progressive mode, your multisystem
TV must be able to support 525p and 625p.
With the disc tray opened, you can also press number button “3” to switch between “NTSC” and “PAL”.
Video Out
The video output of the DVD player can be selected as “RGB” or “HDMI”.
AIn ' Video ', press / to select { Video Out }, then press .
{ RGB }
Select this for Scart connection.
{HDMI }
Select this for HDMI output.
BUse / to select a setting and press OK to con- firm.
When SCART and HDMI cable are connected at the same time, "HDMI" will be automatically selected as the output of the DVD player. You cannot switch to "RGB". Composite video will be output for scart output. To select "RGB" output, simply disconnect the HDMI cable. The video output will be switched to
"RGB".
Smart Picture
This DVD player provides four predefined sets of picture color settings.
AIn ' Video ', press / to select {Smart Picture }, then press .
{ Standard }
Select this for a preset standard picture setting.
{Vivid }
Select this to make the picture brighter.
{Cool }
Select this to make the picture softer.
{Personal }
Select this to personalize your picture color by adjusting the brightness, contrast, tint and color
(saturation).
BUse / to select a setting and press OK to confirm.
CIf you select { Personal }, then proceed to steps D~G.
The setup menu appears.
English
18