Getting Started
Inserting Batteries
AOpen the battery compartment.
BInsert two batteries type R03 or AAA, following the indications (+ / - ) inside the compartment.
CClose the cover.
CAUTION:
-Never throw batteries into a fire.
-The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Note:
-Be sure to use AAA size batteries.
-Dispose of batteries in a designated disposal area.
-Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
-If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.
-When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.
-Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.
Using the Remote Control to Operate the System
30 | 30 |
Within about 6m (19 feet)
AAim the Remote Control directly at the remote sensor
(IR) on the front panel.
BDo not put any objects between the Remote Control and DVD Player while operating the DVD Player.
Finding your viewing channel
and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV' s manual for more details.
Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
Or, the TV remote control may have a button that chooses different video modes.
Or, tune the TV until you can see the DVD player signal from the RF modulator (refer to your TV user manual).
CIf you are using external equipment, (such as audio system or receiver), turn it on and select the appropriate input source for the DVD player output.
Refer to the equipment user’s manual for detail.
Setting the language
Choose your desired
On-Screen Display (OSD) Language
The
Language | OSD language |
| English | |
|
|
| ||
| Subtitle |
| Français | |
| ||||
Video | Audio |
| : Espanolnglish | |
| ||||
| DVD Menu |
| : EngliDeutschh | |
Audio | ||||
|
| Italiano | ||
|
|
|
| |
Rating |
|
|
| |
|
|
|
| |
Misc |
|
|
|
APress SETUP.
BPress / to select { Language }
CPress to highlight { OSD language }, then press
.
DPress / to select a language and press OK to confirm.
Audio, Subtitle and DVD menu language
You can choose your own preferred language or soundtrack from audio, subtitles and DVD menu languages. If the language selected is not available on the disc, the disc’s default language will be used instead.
Language | OSD language | : English | |
|
| ||
| Subtitle | : Off | |
| |||
Video | Audio | English | |
| DVD Menu | French | |
Audio | |||
| Spanish | ||
|
|
English
A Press I/2ON/STANDBY on the DVD player to turn it |
on. |
Rating
Misc
German
Italian
B Turn on the TV and set it to the correct |
channel. You should see the blue DVD background |
screen. |
Usually these channels are between the lowest |
APress SETUP.
BPress / to select { Language }, then press .
CPress / to highlight one of the options below, then press .
Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.
12