Toshiba SD390EKB Connections, Connecting to television, Using Hdmi TM cable, Using Scart socket

English

Connections

		corresponding AUDIO IN jacks on the TV(cable not
	Connecting to television	supplied).
		Using HDMITM cable
IMPORTANT!
	– You only need to make one video connection
from the following options, depending on the			HDTV / DVI TV
capabilities of your television.
	– Connect the DVD player directly to the			HDMI IN
	television.
	Using SCART socket

AUse the scart cable to connect the DVD SCART OUT to the corresponding scart input socket on the TV

(cable not supplied).

If your DVD player will not be connected to a Stereo System or AV Receiver to hear better sound, scart is enough for both audio and video connections.

Using Composite Video Jack(CVBS)

AUse the composite video cable (yellow) to connect the DVD player' s VIDEO(CVBS) jack to the video input jack(or labelled as A/V in,Video In or Composite) on the TV(cable not supplied).

To hear the sound of this DVD player through your

TV, use the audio cables(white/red)to connect AUDIO OUT(L/R)jacks of the DVD player to

IMPORTANT!

–A simple 1-cable connection with a device having an HDMI( high definition multimedia interface ) connector allows digital transfer of both digital video signals and multi-channel audio signals. Use this connection for best picture quality.

–It has plug and play capability using only one HDMI cable for both audio / video output.

AUse an HDMI cable (not supplied) to connect the DVD player’s HDMI out to HDMI IN on the HDMI TV.

Tips:

-Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

-If your TV has a DVI IN jack, you need a HDMI-DVI adapter cable to connect the HDMI out jack on the DVD player. This HDMI-DVI cable has only video output capability, so it is necessary to use separate analogue cable to transfer the audio signals. See “Connecting to a Stereo System” or “Connecting to a Digital AV Receiver” in pages 8-9.

Selecting HDMI mode

During playback, press HDMI on the remote control to select the HDMI video resolution. The video resolution changes as follows every time HDMI is pressed.

Auto g 480p/576p g 720p g 1080i g 1080p Tips:

-If Auto is selected, it follows preference HDMI aspect ratio of TV.

-The HDMI mode that is not supported by your TV will not be selected.

-No Sound will be output from the HDMI cable if the Digital Output is not set to PCM.

-If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

-If your TV only supports 1080i, 1080p will not be selected.

-Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this DVD player.

Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.