Toshiba HD-EP30KB, HD-EP30KE Ethernet, To adjust the player’s clock via the network time protocol

Page 22

Preparation (Continued)

E: Ethernet

Perform this setting if you connect the player to your LAN ( page 17).

After performing this setting, you need to turn off this player and turn it on again to activate this setting. If you do not connect, skip to Step 20.

18 Press

/

to select “Ethernet”, then press OK.

19 Press

/

to select each of the followings, then press OK.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP

 

Off

 

 

 

 

 

 

 

 

 

To set your network information.

 

 

 

 

1

 

Proxy Setting

 

Off

 

 

 

 

 

 

 

 

 

2

To input proxy server address (when your provider requires the setting).

 

 

 

 

 

 

 

 

 

 

 

 

MAC Address

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To display the Mac address of the player. (Fixed. No need to set.)

 

NTP Server

 

Off

 

 

 

 

 

 

 

 

 

 

Network Speed

56kbps Modem

 

 

 

 

 

 

 

 

3

To adjust the player’s clock via the network time protocol.

 

Cookie Setting

Accept

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

To select the speed according to the specification of your LAN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

To select whether you access “Cookies” or not.

 

 

 

 

 

 

 

 

1 DHCP

 

 

 

 

 

2

Proxy Setting

 

 

 

 

1 Set “DHCP” to “On” and

 

DHCP

 

 

Enter the proxy server address when your provider

 

 

 

 

 

 

requires proxy setting.

 

 

 

press OK button.

DHCP

 

On

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

The network information is

IP Address

0

.

0 .

0 .

0

 

 

 

 

Proxy Setting

automatically set.

Subnet Mask

0

.

0 .

0 .

0

1 Set “Proxy” to “On” and

 

Proxy

On

Off

 

Gateway

0

.

0 .

0 .

0

press OK button.

 

Server

 

 

 

 

Skipped when “DHCP”

 

 

 

 

 

2 Set “DNS” to “On” and

 

 

 

 

Port

0

 

 

is set to “On”.

 

2 Enter the specified data

 

press OK button.

 

 

 

OK

Cancel

 

 

 

 

 

 

from the provider.

 

The DNS server is obtained

Gateway

0

.

0 .

0 .

0

 

Refer to the instructions

 

 

 

automatically from the

DNS

 

On

 

Off

 

 

 

 

DHCP server.

 

 

 

below for inputting

3 Select “OK” and press

DNS Server

0

.

0 .

0 .

0

 

characters. (Server, Port)

OK button.

 

 

Confirm

 

 

 

3 Select “Confirm”, then

 

 

 

 

 

 

 

 

 

 

OK

Cancel

 

 

 

 

 

 

 

 

press OK button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Confirming starts.

 

Skipped when “DNS”

 

 

 

 

 

 

If the setup is successful,

 

 

 

 

 

 

 

an IP address appears.

 

is set to “On”.

 

 

 

How to input characters

 

 

 

 

 

 

 

 

 

 

Press OK button.

 

 

 

 

 

 

OK button

To begin or finish input.

 

 

 

 

 

 

 

 

 

If the setup is not successful:

 

 

 

/

buttons

To select a character.

 

 

a) Set “DHCP” to “Off” and

 

DHCP

 

 

/

buttons

To move to the next character.

DHCP

 

On

 

Off

 

CLEAR button

To erase to correct.

 

 

press OK button.

 

 

 

 

 

IP Address

192 . 168 .

1 .

15

Number buttons

To input a number.

 

 

 

 

 

 

Subnet Mask

255 . 255 . 255 .

0

 

 

 

 

 

 

 

 

 

 

Gateway

192 . 168 . 1 .

1

 

 

 

 

 

 

 

DNS

 

On

 

Off

 

 

 

 

 

 

 

 

DNS Server

192 . 168 . 1 .

1

 

 

 

 

 

 

 

 

Confirm

 

 

3

NTP Server

 

 

 

 

b) Input the addresses using the number buttons.

 

 

 

 

 

OK

Cancel

 

 

 

 

 

 

 

 

“IP Address”

This sets a

different address within the

 

 

 

 

 

NTP Server

 

 

same subnet of the PC on your network.

 

Select “On” or “Off” and press OK

 

 

 

 

On

 

 

e.g. if the IP address of the PC is

 

button.

 

 

 

 

 

 

192.168.1.10, set 192.168.1.15 (or some

 

 

 

 

 

Off

 

 

other unused address.)

 

“On”

The player automatically

 

 

 

 

 

 

 

 

 

 

 

 

 

 

accesses an internet server

 

 

 

“Subnet Mask”

This sets the subnet mask of the network

 

 

 

 

 

 

to adjust time protocol.

 

 

 

 

 

environment that will be connected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e.g.: 255.255.255.0

 

 

“Off”

The player does not access

 

 

 

 

“Gateway”

This sets the gateway used by the player

 

 

an internet server

 

 

 

 

 

to adjust its clock.

 

 

 

 

 

(e.g.: 192.168.1.1).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“DNS Server”

This sets the DNS server to be used by the

 

 

 

 

 

 

 

 

player (e.g.: 192.168.1.1).

 

 

 

 

 

 

 

c) Select “OK” and press OK button.

22

HD-EP30KE_Eng.indd 22

07.9.3 2:01:52 PM

Image 22
Contents HD-EP30KB HD-EP30KE This HD DVD player employs a Laser System Result in hazardous radiation exposureLocation of the required label Following information is only for EU-member statesImportant Safety Instructions Precautions Do not use the unit when moisture condensation may occur Moisture condensation occurs during the following casesTable of contents Disc compatibility FeaturesDisc Specification Certain system requirements Important notes about HD DVDHD output jacks Customer supportFront panel Index to parts and controlsRear panel Display Remote control Supplied accessories AccessoriesRemote control Loading batteriesPreparation Resolution and connectionsWhy Hdmi connection is most recommended? Proceed the following steps to set the player readyVia component video input Connecting to a TVVia Hdmi input Via Video yellow inputVia optical digital audio output Connecting to audio systemVia Hdmi output Via analog audio outputPower connection LAN connectionSetting up the player Powering onLanguage Time Press / to select Picture, then press OK ResolutionFor best viewing of film movie material 24p output Audio output Press / to select Audio, then press OKRequires proxy setting To adjust the player’s clock via the network time protocolEnter the proxy server address when your provider EthernetCookie Setting Network SpeedPlaying a disc PlayingPlayback starts If playback does not start, press Play To resume playback from the location last stopped To pause playbackTo stop playback To change playback speedTo select the camera angle To select subtitlesTo select the sound During playback, press SubtitleTo check the current status To locate a positionTo play repeatedly C/D buttons Requirements for HD DVD discs/Web-enabled network contentHD DVD playing options in the future Cursor controlsOutput sound conversion table ADVDuring stop, press Setup Customizing the function settingsGroup Setting Disc Details Settings PictureAudio LanguageAudio Language How to select a languageSubtitle Language On Screen LanguageEthernet GeneralMaintenance Initialize Remote Controller SoundEnable Hdmi Update FirmwareBefore calling service personnel Symptom RemedySpecification Memo Memo Information on Customer Support