U R C - 3 0 0
Volume Control Punch Through
In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Customizer to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the Customizer’s AUDIO device to adjust the volume. Constantly switching the Customizer to TV or AUDIO to adjust the volume is inconvenient in daily life.
You can use Punch Through to set the Customizer’s volume buttons to always control the sound in your system. That way when the Customizer is set to VCR or DVD, the volume up, down and mute buttons will work perfectly without switching back to AUDIO or TV. Here’s how:
Press and hold both the MAIN and ENT (Enter)
1buttons for three seconds. The top of the display shows that you are in SETUP mode now.
Note: You have 30 seconds for each step, otherwise the Customizer will time out automatically.
2From the Setup menu, press the PUNCH button.
3Press the VOL button. The display confirms by displaying “VOL” at the top of the screen. This sets up the group of three buttons (Volume Up, Volume Down and Mute) in one action!
Select Volume
13