U R C - 3 0 0
4Press the button you want to set as a Macro button. The top of the screen will display the label of the button you selected. At the bottom of the screen it displays “STEP0”, indicating that no macro steps have been entered yet.
5Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE
and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen.
Don’t worry about the number of steps. Each macro button can store up to 190 steps, so you are not likely to run out of steps!
Note: You can program delays in between commands by pressing the PAUSE button. Each press adds half a second to the delay.
6Press the LIGHT button to end your macro. A new screen appears:
SAVE
Button
SAVE —
UNDO — EXIT —
If you are happy with your macro, press the SAVE button.
The UNDO button lets you erase the last step.
The EXIT button erases all the macro steps.
7Press the MAIN button twice to return to normal operation.
21