Universal Remote Control URC-300 owner manual Select

T h e C u s t o m i z e r

4The bottom of the display flashes ”PUNCH TO”. Press the device button for the device that doesn’t have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands.

Select

the Device you want to “Punch To”

Note: If you wish to PUNCH to the MAIN device, press the POWER OFF button at this time.

5	The bottom of the display will then flash “PUNCH
	FROM”. Now you select the device that has the

volume commands you want (i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers). The bottom of the display will flash “SAVED”.

Repeat steps 3-5 until all your devices operate the

6 volume perfectly. Press the MAIN button twice to return to normal operating mode and test your Punch Through settings.

Note: The Punch Through feature is not limited to volume and can also be applied to channel or other functions. If you find yourself switching to a particular device frequently to use a group of controls, consider using Punch Through for another group, as listed here:

VOL - Volume Up, Volume Down and Mute

CH - Channel Up, Channel Down and Prev. Channel PLAY - Play, Stop, Pause, Rewind and Fast Forward VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel POWER - Power On and Power Off

14