U R C - 3 0 0
Recalling Pre-Programmed Settings
If you didn’t write down the code numbers you setup your Customizer with, you can recall them via this simple process:
1Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the Customizer will time out automatically.
2Press the RECAL button. The display changes to the recall screens. Each of the four screens dis- plays the Device Name and the Code Number.
Note: Use the page buttons to display any of the four pages of devices and their code numbers.
3Write down the code numbers as they appear. Page 32 of this manual gives a convenient list for you to note your settings.
4Return to normal operation by pressing the MAIN button twice.
29