Universal Remote Control URC-100 owner manual This step you choose the name of the device

	T h e U n i f i e r
4	In this step you choose the name of the device
	you’d like to setup. Use the cursor LEFT or RIGHT

buttons to change the flashing name.

For Example: I want to setup AUX as my second VCR, so I press the cursor LEFT or RIGHT until AUX appears in the display.

LEFT RIGHT

5	Press the MUTE button, then use the left and right
	buttons to select the type of component you plan
	to operate with this device button.
	For Example: I want to operate a VCR, so I press the
	cursor LEFT or RIGHT until VCR appears in the display.
	Note: Each name that appears in the display may
	include several types of components. For example, the
	SAT category includes Digital Video Recorders like
	those from TiVo and Replay. See page 25 for a list of
	component types each Code Table contains.
6	Point the Unifier at the component, then enter the
	first three digit code number from your notes
	using the numbered buttons. After you enter each
	three digit number, look at the component to see
	if it turned off. Continue to enter code numbers
	until the component powers off.
7	When the component powers off, save by pressing
	the LIGHT button. The Unifier responds by

flashing SAVED on the display twice, then returns to normal operating mode.

14