Universal Remote Control URC-100 owner manual C 1 0 Erasing All Learned Commands in ALL Devices

Page 23

U R C - 1 0 0

Erasing All Learned Commands in ALL Devices

Press and hold both the POWER ON and the STOP button for ten seconds.

POWER

ON

Button

STOP

Button

After the display flashes ERASE ten times you can release the buttons. The display will flash CLEAR and the Unifier will return to normal operating mode.

Erasing a Macro

1	Press and hold both the DEVICE button and the
	MUTE button (to erase Device buttons, use AUDIO

and MUTE). Release after SET appears on the display.

Note: You have 30 seconds for each step, otherwise the Unifier will time out automatically.

DEVICE

Buttons

Mute

Button

2	Press the macro button you want to erase. The
	display will flash “CLEAR” then “M ###”.

3 Press the LIGHT button to save.

21

Image 23

Contents Page Thank You Table of Contents Congratulations Battery InstallationGetting Started E U n i f i e rC 1 0 Button LayoutLight Button Shift ButtonPre-Programmed Method Basic SetupLeft Right Channel Up Down Scan code Numbers E U n i f i e r Learning Method Ready Press and hold the same button on your old remote C 1 0 Volume Control Punch Through SET Own Two VCR’s? Set Aux to be VCR2 Advanced SetupThis step you choose the name of the device C 1 0 Editing Device Names AudioOnce the character you want appears, move to M1 ## C 1 0 Macro Button SetupPause C 1 0 Overview of Erasing Erasing One Learned CommandE U n i f i e r Erasing All Learned Commands in One Device Erasing a Macro C 1 0 Erasing All Learned Commands in ALL DevicesRecalling Pre-Programmed Settings E U n i f i e r Erasing All SettingsOptional Expander E U n i f i e r Pre-Programmed Code Tables Audio Amps, Preamps and Receivers Brand Three Digit Setup NumbersKoss Command Button Location Audio Command LocationsSurr CD CD Players and ChangersLotte CD Command Locations DVD Laser Disc Players DVD DVD Players and ChangersDVD Command Locations Angle AUX Tape DecksAUX Lighting & Custom Products AUX Command LocationsDeck B SAT Satellite ReceiversSAT PVR TiVo, Replay etc TV Televisions, Projectors, Monitors SAT Command LocationsAmpro Matsui TV Command Locations Auto CH VCR Video Cassette RecordersMEI Input VCR Command LocationsCBL Cable TV and Web TV Cable Command Locations Right REW Stop Can I program the Unifier on a computer? Frequently Asked QuestionsWhy does the display flash at me sometimes? What is a Macro?Who can I call for more answers? If the batteries run out, will I lose my settings?Specifications WarrantyM O M O M O OCE-0023A Rev