Universal Remote Control URC-100 owner manual M1 ##, C 1 0 Macro Button Setup

U R C - 1 0 0

Macro Button Setup

Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Unifier! What would normally take three remotes and three button pushes, the Unifier can accomplish with the press of one button. We call that a “Macro”. Any of the Power On or the Power Off buttons (on any Device) and all eight of the Device buttons themselves can be set to be Macro buttons!

To setup a macro button, follow these easy steps:

1	Press and hold both the desired DEVICE button and
	the MUTE button for three seconds.

For Example: If you want to make the DVD Power On button a macro button, press and hold DVD and MUTE.

		DEVICE
		Buttons
		Mute
		Button
	The Unifier displays SET in the display.
	SET
	Note: You have 30 seconds for each step, otherwise the
	Unifier will time out automatically.
2	Press the button you want to be a macro. The
	Unifier screen changes to the macro step display:
	ID	Number
		of

M1 ##

Steps

17