Universal Remote Control URC-100 owner manual E U n i f i e r Erasing All Settings

Page 24

T h e U n i f i e r

Erasing All Settings

Should you wish to make a clean start, you can reset the Unifier to its factory default settings by pressing and holding both the POWER OFF button and the STOP button for ten seconds. Continue to hold both buttons as the display flashes ERASE nine times, then CLEAR.

POWER

OFF

Button

STOP

Button

The Unifier displays a self testing routine for a few seconds, then returns to normal operating mode.

Recalling Pre-Programmed Settings

If you wish to recall a previously programmed code number so that you can write it down, follow these steps:

1	Press and hold both the DEVICE button you want to
	identify and the MUTE button. Keep holding them
	down until the display says SET.
2	Press the INFO button.The Device Name will
	appear (blink twice) followed by the three digit

number.

22

Image 24

Contents Page Thank You Table of Contents Battery Installation Getting StartedE U n i f i e r CongratulationsButton Layout C 1 0Shift Button Light ButtonBasic Setup Pre-Programmed MethodLeft Right Channel Up Down Scan code Numbers E U n i f i e r Learning Method Ready Press and hold the same button on your old remote C 1 0 Volume Control Punch Through SET Advanced Setup Own Two VCR’s? Set Aux to be VCR2This step you choose the name of the device Audio C 1 0 Editing Device NamesOnce the character you want appears, move to C 1 0 Macro Button Setup M1 ##Pause Erasing One Learned Command C 1 0 Overview of ErasingE U n i f i e r Erasing All Learned Commands in One Device C 1 0 Erasing All Learned Commands in ALL Devices Erasing a MacroE U n i f i e r Erasing All Settings Recalling Pre-Programmed SettingsOptional Expander E U n i f i e r Pre-Programmed Code Tables Brand Three Digit Setup Numbers Audio Amps, Preamps and ReceiversKoss Audio Command Locations Command Button LocationCD CD Players and Changers SurrLotte CD Command Locations DVD DVD Players and Changers DVD Laser Disc PlayersDVD Command Locations AUX Tape Decks AngleAUX Command Locations AUX Lighting & Custom ProductsSAT Satellite Receivers Deck BSAT PVR TiVo, Replay etc SAT Command Locations TV Televisions, Projectors, MonitorsAmpro Matsui TV Command Locations VCR Video Cassette Recorders Auto CHMEI VCR Command Locations InputCBL Cable TV and Web TV Cable Command Locations Right REW Stop Frequently Asked Questions Why does the display flash at me sometimes?What is a Macro? Can I program the Unifier on a computer?If the batteries run out, will I lose my settings? Who can I call for more answers?Warranty SpecificationsM O M O M O OCE-0023A Rev