Universal Remote Control Unifier URC-100 C 1 0 Erasing All Learned Commands in ALL Devices

Page 23

U R C - 1 0 0

Erasing All Learned Commands in ALL Devices

Press and hold both the POWER ON and the STOP button for ten seconds.

POWER

ON

Button

STOP

Button

After the display flashes ERASE ten times you can release the buttons. The display will flash CLEAR and the Unifier will return to normal operating mode.

Erasing a Macro

1Press and hold both the DEVICE button and the MUTE button (to erase Device buttons, use AUDIO and MUTE). Release after SET appears on the display.

Note: You have 30 seconds for each step, otherwise the Unifier will time out automatically.

DEVICE

Buttons

Mute

Button

2Press the macro button you want to erase. The display will flash “CLEAR” then “M ###”.

3Press the LIGHT button to save.

21

Image 23

Contents Page Thank You Table of Contents Congratulations Battery InstallationGetting Started E U n i f i e rC 1 0 Button LayoutLight Button Shift ButtonPre-Programmed Method Basic SetupLeft Right Light E U n i f i e r Learning Method Ready E U n i f i e r C 1 0 Volume Control Punch Through SET Own Two VCR’s? Set Aux to be VCR2 Advanced SetupLeft Right C 1 0 Editing Device Names AudioUP Cursor Button deletes ALL text M1 ## C 1 0 Macro Button SetupPause C 1 0 Overview of Erasing Erasing One Learned CommandE U n i f i e r Erasing All Learned Commands in One Device Erasing a Macro C 1 0 Erasing All Learned Commands in ALL DevicesRecalling Pre-Programmed Settings E U n i f i e r Erasing All SettingsOptional Expander E U n i f i e r Pre-Programmed Code Tables Brand Code Numbers Audio Amps, Preamps and A/V ReceiversKoss Command Button Location Audio Command LocationsSurr CD CD Players and ChangersLotte CD Command Locations DVD Laser Disc Players DVD DVD Players and ChangersDVD Command Locations AUX Tape Decks AUX Lighting & Custom Products AUX Command LocationsSAT Satellite Receivers AUX Command LocationsSAT DVR TiVo, Replay etc TV TVs, Plasmas, Projectors and Monitors SAT Command LocationsCandle Nikei Auto CH TV Command LocationsVCR VCRs and TV/VCR Combos VCR Command Locations CBL Cable TV Tuner/Descrambler VCR Command LocationsCombano Cable Command Locations Can I program the Unifier on a computer? Frequently Asked QuestionsWhy does the display flash at me sometimes? What is a Macro?Who can I call for more answers? If the batteries run out, will I lose my settings?Specifications WarrantyE U n i f i e r