Universal Remote Control Unifier URC-100 owner manual Light

Page 9

U R C - 1 0 0

6When the component turns off, save the code number you entered by pressing the LIGHT button.

LIGHT

Button

The Unifier responds by flashing SAVED on the display twice, then returns to normal operating mode.

When the display shows a device name, you are

7back in normal operating mode. Now it’s time to test all the buttons. If some buttons don’t work, try repeating steps 1-6 with the remaining code numbers, to see if you can improve the match to your component.

For Example: My Sony TV powered off with TV code number 147. However the number buttons didn’t work when I tested them. So, I repeated steps one to six, using other code numbers and eventually discovered that when code number 185 is set, all the buttons work perfectly.

8Repeat steps one through seven for each of your devices. In most systems, you can finish basic setup in just a few minutes and put all your old remote controls away.

7

Image 9

Contents Page Thank You Table of Contents Getting Started Battery InstallationE U n i f i e r CongratulationsC 1 0 Button LayoutLight Button Shift ButtonPre-Programmed Method Basic SetupLeft Right Light E U n i f i e r Learning Method Ready E U n i f i e r C 1 0 Volume Control Punch Through SET Own Two VCR’s? Set Aux to be VCR2 Advanced SetupLeft Right C 1 0 Editing Device Names AudioUP Cursor Button deletes ALL text M1 ## C 1 0 Macro Button SetupPause C 1 0 Overview of Erasing Erasing One Learned CommandE U n i f i e r Erasing All Learned Commands in One Device Erasing a Macro C 1 0 Erasing All Learned Commands in ALL DevicesRecalling Pre-Programmed Settings E U n i f i e r Erasing All SettingsOptional Expander E U n i f i e r Pre-Programmed Code Tables Brand Code Numbers Audio Amps, Preamps and A/V ReceiversKoss Command Button Location Audio Command LocationsSurr CD CD Players and ChangersLotte CD Command Locations DVD Laser Disc Players DVD DVD Players and ChangersDVD Command Locations AUX Tape Decks AUX Lighting & Custom Products AUX Command LocationsSAT Satellite Receivers AUX Command LocationsSAT DVR TiVo, Replay etc TV TVs, Plasmas, Projectors and Monitors SAT Command LocationsCandle Nikei Auto CH TV Command LocationsVCR VCRs and TV/VCR Combos VCR Command Locations CBL Cable TV Tuner/Descrambler VCR Command LocationsCombano Cable Command Locations Why does the display flash at me sometimes? Frequently Asked QuestionsWhat is a Macro? Can I program the Unifier on a computer?Who can I call for more answers? If the batteries run out, will I lose my settings?Specifications WarrantyE U n i f i e r