Toshiba MW20FP1 Clock setting, Auto clock setting To set auto clock to OFF, Auto clock adjustment

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself.

TV/VCR POWER

DISPLAY

MENU

// /

Auto clock setting To set auto clock to OFF

Preparation:

•Connect the antenna or cable system.

•If you use a cable box, turn it on.

•Plug the AC power cord to the AC outlet.

1Make sure the unit is turned off.

•If you press POWER, the Auto Clock set is not effective.

2Wait at least three minutes and press POWER. Then press TV/VCR to select TV/VCR mode.

The POWER indicator will light.

POWER POWER

TV/VCR

3 Press DISPLAY to check the clock on the screen.

TV/VCR

8 : 47AM MON CH 125 STEREO SAP

When shipped from factory the AUTO CLOCK is set to “ON”. But if you do not want auto clock set (Adjustment):

1 Press MENU, then press or to select option.

MENU

SETUP

	CLOCK SET
	ON/OFF TIMER
	AUTO CLOCK	ON
ENTER	STANDARD TIME
	DAYLIGHT
	SAVING TIME
	/ / / / MENU

2 Press or to select “AUT O CLOCK”.

	CLOCK SET
	ON/OFF TIMER
	AUTO CLOCK	ON
ENTER	STANDARD TIME
	DAYLIGHT
	SAVING TIME
	/ / / / MENU

Basic setup

DISPLAY

00 :00 :00 SP

4 If the clock is not set, check the antenna condition. The Auto clock may not function properly if the reception condition is not good.

Auto clock adjustment

The Auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit.

•If you use a cable box and you want Auto Clock adjust ment to be performed, the cable box must be left on.

•The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

3 Press or to select “OFF” .

	CLOCK SET
	ON/OFF TIMER
	AUTO CLOCK	OFF
ENTER	STANDARD TIME
	DAYLIGHT
	SAVING TIME
	/ / / / MENU

4 Press MENU repeatedly until the menu screen is cleared.

	• When the AUTO CLOCK is set to
MENU	“OFF”, the Auto Clock adjustment
	does not function.
SETUP	• Set the clock manually 21 .

Notes:

•If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

•The TV section has its own menu and also DVD section has its own menu 56 .

•If no buttons are pressed for more than 60 seconds, the TV/VCR menu screen will return to normal TV operation automatically.

19

5L00201C [E]p18-21 19

20/4/04, 16:05