Playback (VCR)
Cassette tape playback | TV/VCR |
| |
To play a prerecorded tape. |
|
| REV |
| PLAY |
| FWD |
| STOP |
| REW FF Illustration of MW20FP1 |
| PLAY |
| STOP/EJECT |
Playback
1 Load a prerecorded tape:
(When loading a cassette tape without the erase prevention tab, playback will start automatically).
Rewind or forward the tape
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press
REV on the remote.
2 | To start playback: |
|
Press PLAY on the front panel or on | ||
| the remote. |
|
| Playback will start. “ | ” will appear |
| on the screen for about 4 seconds. |
REV
To forward the tape:
Press FF on the front panel or press
FWD on the remote.
PLAY
FWD
To stop playback:
Press STOP/EJECT once on the front panel or press STOP on the remote. The tape will stop but remain fully loaded and ready to play.
“ ” will appear on the screen for about 4 seconds.
To stop the
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REV or FWD again and hold it down. The unit will resume the tape winding as soon as the button is released.
STOP
Notes:
•If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button.
•This unit selects the playback tape speed SP or SLP auto- matically.
•When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the resuming playback mode automatically.
34
5L00201C | 34 |
20/4/04, 16:06