One-touch Timer Recording (OTR)
DVD 4
5
The
STOP 2
One-touch timer recording (OTR)
Example:
1 Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2 Press SP/SLP to select the desired tape speed SP or SLP.
The tape counter and SP or SLP will appear on the screen for about 4 seconds.
5 Press both REC at the same time to begin recording. Press the buttons again to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown below, up to a maximum of 6 hours. “OTR” will appear on the screen.
Press | Recording time | Press | Recording time |
once | NORMAL REC | 6 times | 3:00 |
twice | 0:30 | 7 times | 4:00 |
3 times | 1:00 | 8 times | 5:00 |
4 times | 1:30 | 9 times | 6:00 |
5 times | 2:00 | 10 times | NORMAL REC |
|
|
|
|
OTR 0 : 30
CH 110
Recording
REC
SP/SLP
RETURN | 00 :00 :00 SP |
(VCR)
Set “TV” or “CABLE” option to the appropriate
3 position 26 .
|
| TV | - VHF/UHF channels |
|
| CABLE - Cable TV channels | |
4 | Press Direct channel selection | ||
/ to select the channel to be recorded. | |||
1 | 2 | 3 |
|
|
|
| CH 110 |
4 | 5 | 6 |
|
|
| CHANNEL |
|
7 | 8 | 9 |
|
| 0 |
|
|
To cancel OTR
Press STOP.
STOP
“ ” will appear on screen for about 4 seconds.
Notes:
•If you wish to watch the DVD playback during the recording or the OTR, press the DVD button to change to DVD mode and perform the DVD playback 44 .
•The channel cannot be changed during recording.
39
5L00201C | 39 |
20/4/04, 16:07