Other functions (VCR)
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
TV/VCR
3
STOP
2 
1
Duplicating a video tape
Preparation:
•Press TV/VCR to select the TV/VCR mode.
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SP/SLP to select the desired tape speed SP or SLP.
SP/SLP | It is recommended that you set the |
| Speed to the SP mode on the |
RETURN | recording VCR for best results. |
Connection with second video recorder
• Select “LINE1” on step 2.
Playback VCR
To VIDEO OUT | To AUDIO (R) OUT |
Audio/Video cable (not supplied) | To AUDIO (L) OUT |
Recording VCR |
|
Press INPUT SELECT once or twice to select
2 AUDIO/VIDEO input position.
“LINE1” or “LINE2” will appear on the screen.
LINE1
INPUT
SELECT
ZOOM
LINE1: on the rear panel
LINE2: on the front panel
3 Press both REC at the same time.
REC 
4 Press PLAY on the playback VCR or camcorder.
5 PressSTOP STOP after duplicating a video tape.
Note:
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
VHF/UHF
To VIDEO IN
DIGITAL AUDIO
To AUDIO (L) IN
To AUDIO (R) IN
Connection with Camcorder
• Select “LINE2” on step 2.
Playback Camcorder 
Recording VCR
To AV Jack
Illustration of MW20FP1
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN | Audio/Video cable (not supplied) |
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
42
5L00201C | 42 |
20/4/04, 16:07