Toshiba MW24F11, MW20F11 owner manual Clock setting, Auto clock setting, To set auto clock to OFF

Page 19

TV/VCR

POWER

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day,

DISPLAY

 

Year and Time) when the unit is connected to an antenna or cable system

 

and it is turned off. As the unit searches for a receivable station in your area

 

and it receives a broadcast signal for auto clock, the auto clock needs

/ / /

several minutes to set itself.

 

MENU

Auto clock setting

Preparation:

Connect the antenna or cable system.

If you use a cable box, turn it on.

Plug the AC power cord to the AC outlet.

1Make sure the unit is turned off.

If you press POWER, the Auto Clock set is not effective.

2Wait at least three minutes and press POWER.

• Depending on the reception

condition, it may take approx. thirty minutes.

POWER • The POWER indicator will light.

3 Press TV/VCR to select TV/VCR mode. Then press DISPLAY to check the clock on the

￿￿￿￿￿￿ ￿￿￿￿￿

To set auto clock to OFF

When shipped from factory the AUTO CLOCK is set to “ON”.

But if you do not want auto clock set (Adjustment):

1 Press MENU, then press or to select option.

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿

2

Press or

to select “AUTO CLOCK”.

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿

 

 

￿

￿￿￿￿

 

Basic setup

screen.

￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿

3 Press or to select “OFF”.

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿

￿

￿￿￿￿￿￿￿￿￿￿￿

 

4 If the clock is not set, check the antenna condition. The Auto clock may not function properly if the reception condition is not good.

Auto clock adjustment

The Auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit.

If you use a cable box and you want Auto Clock adjust- ment to be performed, the cable box must be left on.

The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

4 Press MENU repeatedly until the menu screen is cleared.

• When the AUTO CLOCK is set to “OFF”, the Auto Clock adjustment does not function.

• Set the clock manually 21 .

Notes:

If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

The TV section has its own menu and also DVD section has its own menu 53 .

If no buttons are pressed for more than 60 seconds, the TV/VCR menu screen will return to normal TV operation automatically.

19

5T40301A [E]p18-21

19

3/1/05, 10:16

Image 19
Contents MW20F11 MW24F11 Introduction Important SafeguardsIntroduction S3126AHeat Ously with high volume sound, it may cause hearing damageTo USE AC Power Source Power sourceDisc Do not use the unit when moisture condensation may occur PrecautionsMoisture condensation occurs during the following cases On storing discs On cleaning discsStructure of disc contents On handling discsPlayable discs On Video CDsDVD Contents Illustration of MW20F11 Identification of controlsFront panel See the page in for detailsRemote control Operation Inserting batteriesAntenna Antenna connectionsConnections ConnectionsConverter Descrambler Cable TV connectionsConverter DescramblerLINE1 LINE2 Connecting to optional equipmentConnecting a camcorder or a TV game Connecting to an audio systemDigital Theater Systems DTS Connecting to an amplifier equipped with a DTS decoderDolby Digital Dolby Surround Pro LogicChannel digital stereo MPEG2 soundEnter Starting setupStarting setup Basic setupTo set auto clock to OFF Clock settingAuto clock setting Auto clock adjustmentGMT Greenwich Mean Time To set standard timeTo make corrections any time during the process Manual clock settingSet the day, year and time as in , then Press Enter VCR operation Setting the languageWhile watching TV While operating a tapeTV operation TV operationTV operation Mute HeadphonesChannel UP/DOWN Channel ReturnClosed captions What is Closed CAPTIONING?Closed captions To ADD/DELETE channels Automatic memory tuningTo memorize channels TV/CABLE selectionIf you put a wrong number, press Setting the V-ChipTo register password To change password CancelTV-G To set the V-ChipOFF TV-YTo set the on timer To set the on timerPress MENU. Press or to select Option To confirm the ON/OFF Timer To set the off timerTo set the off timer To cancel the OFF Timer functionMode Picture quality Picture control adjustment Adjusting the picture preferencePicture control adjustment Adjusting the picture preferenceTo select desired sound Sound control adjustmentListening to stereo sound Listening to SAP Second Audio ProgramTo prevent accidental erasure Loading and unloading a cassette tapeLoading UnloadingPlayback Cassette tape playbackRewind or forward the tape Special playback Be repeated endlessly Repeat playback Using the real time tape counterConvenient function Press MENU, then press or to select optionVideo head clogging Zero return function Video head cleaningVideo head cleaning Press DisplayTo stop recording temporarily Recording a TV programRecording a TV program To stop recordingSet TV or Cable option to the appropriate Position One-touch Timer RecordingOne-touch timer recording OTR To cancel OTRSpeed as in step Then press Enter Timer recordingTimer recording ExampleIf the programs overlap another To set daily/weekly timerTo confirm the settings To cancel a programConnection with second video recorder Duplicating a video tapeDuplicating a video tape Other functions VCRDuplicating a DVD or CD disc Recording a DVD/CD discOther functions VCR Vcdcd Basic playback Playing a discBasic playback DVD Basic playback DVD To pause playback still mode To remove the discTo obtain a higher quality picture PlayVCD Locating a chapter or track VCD Playing in fast reverse or fast forward directionsVcddvd Playing frame by frame Vcddvd Playing in slow-motionVCD Locating desired scene DVD ZoomingAdvanced playback DVD VCD Repeat playback Repeat playback/A-B Repeat playbackVCD A-B Repeat playback Vcdcd Program playback Program playback/Random playbackRandom playback DVD menu Changing angles/Title selection/DVD menuChanging angles Title selectionChanging soundtrack language Subtitles Changing soundtrack language SubtitlesAudio Select Video CD Disc status/To turn off the PBCVCD Disc status VCD To turn off the PBCVCD Setting procedure Customizing the function settingsFunction setup DVD Setting details Original Audio Menu, Subtitle, AudioEnglish, Francais, Espanol OtherDRC Picture ModeIf you forget the password Parental control settingTo change the parental level To exit from the entry, press Return Playback will commence if the entered password was correctTemporary disabling of rating level by DVD disc Load a DVD disc and press Play or OPEN/ Close on the unitOthers Language code listOthers Symptoms Cause Possible Solutions Power TroubleshootingSymptoms Cause Possible Solutions VCR Ignition Reception disturbancesInput/Output SpecificationsSupplied accessories MW20F11 MW24F11 GeneralLimited Ninety 90 Day Warranty Limited warrantyContinental United States contact How to Obtain Warranty ServiceMemo Memo 5T40301A Ep64-Back