Toshiba MW20F11, MW24F11 owner manual Playing a disc, Vcdcd Basic playback, Basic playback DVD

Basic playback (DVD)

Playing a disc

This section shows you the basics on how to play a disc.

CAUTION

Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

DVD

VCDCD Basic playback

Preparations:

Illustration of MW20F11 ￿￿￿￿￿￿￿

•Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set “Starting setup” 18 .

•When connecting to other equipment, turn power off.

	Press POWER on the unit or on the remote control		5	Press OPEN/CLOSE or PLAY.
	to turn on the unit.
1 The Power indicator will light.							The disc tray closes automatically.
	• Every time you press POWER, the TV/VCR/DVD					OR	On the TV-screen, “		” changes to
	starts from TV mode.						“Reading” and then playback
	• When using an amplifier, switch on the amplifier.						commences.
	POWER							Reading
2	Press DVD to select DVD mode.
	The DVD startup screen will appear on the screen.
	“Reading” display will change to “No Disc”. (If DVD disc			• A menu screen will appear on the TV screen, if
	has already loaded, play-
		Reading			the disc has a menu feature.
	back will start automati-
					Press C/D or B/A to select title, then press ENTER.
	cally.)
					Title is selected and play commences.
			6	Press STOP to end playback.
							3 Resuming facility
3	Press OPEN/CLOSE.						• The unit records the stopped point,
							depending on the disc. “			”
	The disc tray opens.
							appears on the screen. Press

PLAY to resume playback (from the scene point).

• If you press STOP again or unload the disc (“3” appears on the screen.), the unit will clear the stopped point.

4 Place the disc on the disc tray.

With the playback side down

•There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the unit to malfunction.

•Do not place a disc which is unplayable on the disc tray.

3To start playback in the stop mode Press PLAY.

Note:

If the unit does not operate properly:

Static electricity, etc., may affect the player's operation. Discon- nect the AC power cord once, then connect it again.

44

5T40301A [E]p44-47 44 3/1/05, 10:18