Toshiba MW24F11, MW20F11 DVD Zooming, VCD Locating desired scene, Advanced playback DVD

Advanced playback (DVD)

Zooming/Locating desired scene

DVD Zooming

VCD

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM 1 (x 1.3),2 (x 1.5) and3 (x 2.0).

1

DISPLAY

0–9

JUMP

ENTER

// /

CANCEL

ZOOM

DVD

VCD Locating desired scene

CD

Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD disc, time and track are used to locate the desired point to play back.

To check the title, chapter and time, press DISPLAY.

1 Press JUMP during playback or stop mode.

Time		/
Title	/6
Chapter	/
/Enter/0	9/Cancel/Jump

•“Time” only works in playback or resume stop mode.

2 Press // / to view a different part of the frame.

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

3 In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off).

Notes:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

2 Press or to select the “Time”, “Title” or “Chapter”.

	Time	/6	/
	Title
	Chapter	/
	/Enter/0	9/Cancel/Jump
	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿
Press Number buttons (0–9) to change the
3 number.	￿￿￿￿		￿

•If you input a wrong number, press

CANCEL.

•Refer to the package supplied with the disc to check the numbers.

4 Press ENTER. Playback starts.

• When you change the title, playback starts from Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Advanced playback (DVD)

Note:

In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page ￿￿.

47

5T40301A [E]p44-47 47 3/1/05, 10:31