Toshiba MW24F11, MW20F11 owner manual To obtain a higher quality picture, Play, Basic playback DVD

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

About DVD VCD CD

The	DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD	: You can use this function with DVD video discs.
VCD	: You can use this function with Video CDs.
CD	: You can use this function with Audio CDs and CD-R/RW CDs.

POWER

DVD

PLAY

ENTER

// /

PAUSE

STOP

OPEN/CLOSE

To pause playback (still mode)		To remove the disc
Press PAUSE during playback.		Press OPEN/CLOSE.
	To resume normal playback, press		Remove the disc after the disc tray
	PLAY.		opens completely.

• The sound is muted during still mode.

To stop playback

Press STOP.

Be sure to press OPEN/CLOSE to close the disc tray after you remove the disc.

Notes:

Basic playback (DVD)

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 57).

•Some discs may take a minute or so to start playback.

•When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit, “Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.

•Some discs may not work the resuming facility.

•Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 52.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the unit during playback. Doing so may damage the disc.

•Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit to malfunction.

•Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to malfunction.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on your remote control once the movie is completed.

•There may be a slight delay between you pressing the button and the function activating.

45

5T40301A [E]p44-47 45 3/1/05, 10:18