Toshiba MW24F11, MW20F11 owner manual Parental control setting, To change the parental level

Page 57

￿￿￿￿￿￿￿￿￿

￿

￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Parental control setting

Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.

1)Press C or D to select “Parental”, then press B or A until the level you require appears.

Level Off: The parental control setting does not function.

Level 8: All DVD software can be played back.

Level 1: DVD software for adults cannot be

played back.

Select from the level 1 to level 8. The limitation will be more severe as the level number is lower.

2)Press C or D to select “Password”.

Press Number buttons (0–9)to input a 4-digit password. Be sure to remember this number!

• If you input a wrong number, press CANCEL.

3)Press ENTER to store the password.

Note: Now the rating is locked and the setting can not be changed unless you enter the correct pass word.

4)Press OPEN/CLOSE to activate Parental control setting. (See “Temporary disabling of rating level by DVD disc” on page 58.)

Notes:

Depending on the discs, the unit cannot limit playback.

Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.

To change the parental level

1)Press C or D to select “Password”.

2)Press Number buttons (0–9)to enter the password you have stored.

3)Press ENTER.

• The rating is now unlocked.

4)Press C or D to select “Parental”, then press B or A to change the parental level.

5)Press C or D to select “Password”, then press Number buttons (0–9)to enter the password. Note: You can change the password if you want.

6)Press ENTER.

Now the parental level is changed and locked.

If you forget the password...

1.Press OPEN/CLOSE to open the disc tray.

2.Remove the disc.

3.Press OPEN/CLOSE again to close the disc tray. “No Disc” appears on the screen.

4.While holding STOP down on the front panel, press 7 on the remote control. “PASSWORD CLEAR” appears on the screen.

5.Enter a new password again.

Note:

If each setup (pages 55~57) has been completed, the unit can always be worked under the same conditions (espe- cially with DVD discs).

Each setup will be retained in the memory even if you turn the power off.

Function setup (DVD)

57

5T40301A [E]p53-58

57

3/1/05, 10:19

Image 57
Contents MW20F11 MW24F11 Introduction Important SafeguardsIntroduction S3126AHeat Ously with high volume sound, it may cause hearing damagePower source To USE AC Power SourceDisc Precautions Do not use the unit when moisture condensation may occurMoisture condensation occurs during the following cases Structure of disc contents On cleaning discsOn handling discs On storing discsOn Video CDs Playable discsDVD Contents Front panel Identification of controlsSee the page in for details Illustration of MW20F11Remote control Operation Inserting batteriesConnections Antenna connectionsConnections AntennaConverter Cable TV connectionsDescrambler Converter DescramblerConnecting a camcorder or a TV game Connecting to optional equipmentConnecting to an audio system LINE1 LINE2Dolby Digital Connecting to an amplifier equipped with a DTS decoderDolby Surround Pro Logic Digital Theater Systems DTSChannel digital stereo MPEG2 soundStarting setup Starting setupBasic setup EnterAuto clock setting Clock settingAuto clock adjustment To set auto clock to OFFGMT Greenwich Mean Time To set standard timeManual clock setting To make corrections any time during the processSet the day, year and time as in , then Press Enter While watching TV Setting the languageWhile operating a tape VCR operationTV operation TV operationTV operation Channel UP/DOWN HeadphonesChannel Return MuteWhat is Closed CAPTIONING? Closed captionsClosed captions To memorize channels Automatic memory tuningTV/CABLE selection To ADD/DELETE channelsTo register password To change password Setting the V-ChipCancel If you put a wrong number, pressOFF To set the V-ChipTV-Y TV-GTo set the on timer To set the on timerPress MENU. Press or to select Option To set the off timer To set the off timerTo cancel the OFF Timer function To confirm the ON/OFF TimerPicture control adjustment Picture control adjustment Adjusting the picture preferenceAdjusting the picture preference Mode Picture qualityListening to stereo sound Sound control adjustmentListening to SAP Second Audio Program To select desired soundLoading Loading and unloading a cassette tapeUnloading To prevent accidental erasureCassette tape playback PlaybackRewind or forward the tape Special playback Convenient function Repeat playback Using the real time tape counterPress MENU, then press or to select option Be repeated endlesslyVideo head cleaning Zero return function Video head cleaningPress Display Video head cloggingRecording a TV program Recording a TV programTo stop recording To stop recording temporarilyOne-touch timer recording OTR One-touch Timer RecordingTo cancel OTR Set TV or Cable option to the appropriate PositionTimer recording Timer recordingExample Speed as in step Then press EnterTo confirm the settings To set daily/weekly timerTo cancel a program If the programs overlap anotherDuplicating a video tape Duplicating a video tapeOther functions VCR Connection with second video recorderRecording a DVD/CD disc Duplicating a DVD or CD discOther functions VCR Playing a disc Vcdcd Basic playbackBasic playback DVD To obtain a higher quality picture To pause playback still mode To remove the discPlay Basic playback DVDVcddvd Playing frame by frame VCD Playing in fast reverse or fast forward directionsVcddvd Playing in slow-motion VCD Locating a chapter or trackDVD Zooming VCD Locating desired sceneAdvanced playback DVD Repeat playback/A-B Repeat playback VCD Repeat playbackVCD A-B Repeat playback Program playback/Random playback Vcdcd Program playbackRandom playback Changing angles Changing angles/Title selection/DVD menuTitle selection DVD menuChanging soundtrack language Subtitles Changing soundtrack language SubtitlesAudio Select VCD Disc status Disc status/To turn off the PBCVCD To turn off the PBC Video CDCustomizing the function settings VCD Setting procedureFunction setup DVD Setting details English, Francais, Espanol Menu, Subtitle, AudioOther Original AudioDRC Picture ModeParental control setting If you forget the passwordTo change the parental level Temporary disabling of rating level by DVD disc Playback will commence if the entered password was correctLoad a DVD disc and press Play or OPEN/ Close on the unit To exit from the entry, press ReturnLanguage code list OthersOthers Symptoms Cause Possible Solutions Power TroubleshootingSymptoms Cause Possible Solutions VCR Ignition Reception disturbancesSupplied accessories SpecificationsMW20F11 MW24F11 General Input/OutputLimited Ninety 90 Day Warranty Limited warrantyContinental United States contact How to Obtain Warranty ServiceMemo Memo 5T40301A Ep64-Back