Toshiba MV13P3 owner manual Safety Precautions, Moisture Condensation

Page 8

SAFETY PRECAUTIONS

MOISTURE CONDENSATION

DO NOT OPERATE ANY FUNCTIONS ON THIS UNIT FOR AT LEAST THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON IT. LET THE UNIT STAND WITH POWER ON (SEE BELOW).

WHAT IS MOISTURE CONDENSATION?

When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the glass. This is called moisture condensation.

MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;

•When you move the unit from a cold to a warm place.

•After heating a cold room or under extremely humid conditions.

WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,

Plug the power cord into an AC outlet, press the POWER button to turn on and leave the unit at room temperature until moisture condensation disappears. Depending on the surrounding conditions, this may take about three hours.

Head Drum

Video Tape

If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the wall outlet, wait a few minutes and plug it back in. The unit should return to normal operation.

Avoid extreme heat.

104˚F

(40˚C)

Do not place the unit on or near appliances which may	Avoid extreme cold.
cause electromagnetic interference (e.g. speakers,
etc). Doing so may cause erratic operation of the unit
including picture and/or sound distortion or noise.

		(5˚C)
		41˚F

Avoid extreme moisture and dust.

The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid covering the holes with soft materials such as cloth or paper.

6

5L80301C P01-09

6

20/4/04, 16:25

Image 8

Contents TV/CABLE Mode Selection MV13P3Risk of Electric Shock Do not Open Cleaning AccessoriesPower Source Grounding or Polarization Read InstructionsPOWER-CORD Protection Power LinesReplacement Parts LightningNEC Section Safety CheckHeat Features Table of Contents Safety Precautions When YOU Experience the Above ConditionsMoisture Condensation Moisture will Condense on the Unit in the Following CasesWider Hole and Blade AC Outlet Power SourceTo USE AC Power Location of Controls Front RearDescription of Controls FrontSpeed button Sets the tape speed for recording Remote ControlCursor Selects an item in the menu Battery Installation Battery PrecautionsEffective Distance of the Remote Control FeetAntenna Connections JackOhm matching transformer Antenna Jack Combiner UHF 300 ohm VHF 300 ohmCable TV Connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service Starting Setup EnterSetting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFFAuto for automatic setting read EDS in the signal Press MENU. Press Bor a to select optionPress or to select Daylight Saving TIME, then press a Menu screen is clearedManual Clock Setting Press Bor Ato setMonth, then press As in , then pressPress Power Adjust the volume level byTV Operation Cable TV ChannelsCall MuteChannel + MuteClosed Caption Channel Return SleepSleep Closed CaptionTo View Closed Captions What is Closed CAPTIONING?Closed Captioning with a VCR TV/CABLE Selection Cable TV chartTo Memorize Channels Numbers will remain red until auto memorizing is complete Automatic Memory TuningThen press a To ADD/DELETE Channels Channel selectionSetting the V-CHIP To Register PasswordEnter the same password Using Direct channelTo SET the V-CHIP Enter To use the TV after the TV is protectedTo Change Password To SET the on Timer Press B or Ato select ON/OFF TIMER, thenOn TIMER, then press a Option Press aOption Press a To SET the OFF TimerPress Bor Ato select Selection Pressing Picture Control AdjustmentsCancel Adjusting the Picture Preference Mode Picture QualityPress B or a to select option PREFERENCE, then press a Press or to select the desired pictureAutomatic Power on and Play Loading and Unloading a Video CassetteLoading UnloadingSP Standard Play To Prevent Accidental Erasure To Record AgainTape Speed and Maximum PLAYBACK/RECORDING Time Playback To Start PlaybackStop To Stop PlaybackDigital Tracking Controls REWTo Rewind or Forward the Tape Rapidly FORWARD/REVERSE Picture SearchSpecial Playback StopSkip Search PAUSE/STILLPress Bor Ato select on Over until the repeat mode is canceledTo Watch a Tape Repeatedly Recording a TV Program Recording and Viewing the Same TV ProgramScreen and the REC indicator will light To Stop Recording To Stop Recording TemporarilyPress Direct channel selection 0-9orCH + Ple ChannelONE-TOUCH Timer Recording OTR Press Direct channelTimer Recording Press or to select Timer REC SETPosition, then press Enter Press the or to select the programTimer REC indicator will light Speed as in stepPress Enter Steps 3 to 6 to set the second programOther Functions for the Timer Recording CancelTo Cancel a Program If the Program ProgramDisplay the elapsed time Using the Real Time Tape CounterTo View the Counter Display Using Zero Return Before playback or recording, press000000 Press Zero ReturnIndex search TV MonitorTo Monitor a TV Program Connection to Camcorder Duplicating a Video TapeConnection to Another VCR Reception Disturbances Problem and Troubleshooting Guide Check the following chart before requesting serviceSymptom Cause Possible Solution Power No powerSymptom Cause Possible Solution Remote ControlDepressed To turn on the closed caption RecordingVideo Head Cleaning Video Head CleaningVideo Head Clogging TelevisionLimited Ninety 90 Day Warranty Limited One 1 Year WarrantyLimited Two 2 Year Warranty of Picture Tube Rental UnitsHow to Obtain Warranty Service Toll FreeContinental United States contact 04/04 U