Toshiba MV13P3 owner manual Auto Clock Setting, Auto Clock Adjustment, To SET Auto Clock to OFF

Page 17

AUTO CLOCK SETTING

The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is connected to an antenna or cable TV system and it is turned off. As the TV/VCR searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself.

AUTO CLOCK SETTING

1.Connect the antenna or cable TV system.

If you use a cable box, turn it on.

2.Plug the AC power cord to the AC outlet.

3.Make sure the TV/VCR is turned off.

If you press POWER, the auto clock set is not effective.

4.Wait at least three minutes and press POWER.

5.Press CALL to check the clock on the screen.

6.If the clock is not set, check the antenna condition. The auto clock may not function properly if the reception condition is not good.

AUTO CLOCK ADJUSTMENT

The auto clock adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.

If you use a cable box and you want auto clock adjustment to be performed, the cable box must be left on.

The auto clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

TO SET AUTO CLOCK TO OFF

When shipped from factory the AUTO CLOCK option is set to “ON”.

But if you do not want Auto Clock set (Adjustment):

1.Turn on the TV/VCR.

2.Press MENU.

3.Press B or Ato select option.

4.Press or to select “AUTO CLOCK”.

5.Press Bor Ato select “OFF”.

6.Press MENU repeatedly until the menu screen is cleared.

When the “AUTO CLOCK” is set to “OFF”, the auto clock adjustment does not function.

Set the clock manually (see page 17).

TO SET STANDARD TIME

In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may recognize the wrong station for the auto clock set.

To correct the situation:

1.Press MENU.

2.Press Bor Ato select option.

3.Press or to select “STANDARD TIME”, then press A.

4.Press //B/Ato select your time zone, then press ENTER.

ATLANTIC

:

GMT – 4

hours

(GMT: Greenwich Mean Time)

EASTERN

:

GMT – 5

hours

 

CENTRAL

:

GMT – 6

hours

 

MOUNTAIN

:

GMT – 7

hours

 

PACIFIC

:

GMT – 8

hours

 

ALASKA

:

GMT – 9

hours

 

HAWAII

:

GMT – 10 hours

 

AUTO

:

AUTO SET

 

 

5. Press MENU repeatedly until the menu screen is cleared.

NOTE: To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.

15

5L80301C P10-19

15

20/4/04, 16:26

Image 17
Contents MV13P3 TV/CABLE Mode SelectionRisk of Electric Shock Do not Open Accessories CleaningPower Source Grounding or Polarization Read InstructionsPower Lines POWER-CORD ProtectionReplacement Parts LightningNEC Section Safety CheckHeat Features Table of Contents When YOU Experience the Above Conditions Safety PrecautionsMoisture Condensation Moisture will Condense on the Unit in the Following CasesWider Hole and Blade AC Outlet Power SourceTo USE AC Power Front Rear Location of ControlsDescription of Controls FrontSpeed button Sets the tape speed for recording Remote ControlCursor Selects an item in the menu Battery Precautions Battery InstallationEffective Distance of the Remote Control FeetJack Antenna ConnectionsOhm matching transformer Antenna Jack Combiner UHF 300 ohm VHF 300 ohmCable TV Connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service Enter Starting SetupSetting the Language Auto Clock Setting Auto Clock SettingAuto Clock Adjustment To SET Auto Clock to OFFPress MENU. Press Bor a to select option Auto for automatic setting read EDS in the signalPress or to select Daylight Saving TIME, then press a Menu screen is clearedPress Bor Ato set Manual Clock SettingMonth, then press As in , then pressAdjust the volume level by Press PowerTV Operation Cable TV ChannelsMute CallChannel + MuteSleep Closed Caption Channel ReturnSleep Closed CaptionTo View Closed Captions What is Closed CAPTIONING?Closed Captioning with a VCR TV/CABLE Selection Cable TV chartTo Memorize Channels Numbers will remain red until auto memorizing is complete Automatic Memory TuningThen press a Channel selection To ADD/DELETE ChannelsTo Register Password Setting the V-CHIPEnter the same password Using Direct channelTo SET the V-CHIP To use the TV after the TV is protected EnterTo Change Password Press B or Ato select ON/OFF TIMER, then To SET the on TimerOn TIMER, then press a Option Press aOption Press a To SET the OFF TimerPress Bor Ato select Selection Pressing Picture Control AdjustmentsCancel Mode Picture Quality Adjusting the Picture PreferencePress B or a to select option PREFERENCE, then press a Press or to select the desired pictureLoading and Unloading a Video Cassette Automatic Power on and PlayLoading UnloadingSP Standard Play To Prevent Accidental Erasure To Record AgainTape Speed and Maximum PLAYBACK/RECORDING Time To Start Playback PlaybackStop To Stop PlaybackREW Digital Tracking ControlsTo Rewind or Forward the Tape Rapidly FORWARD/REVERSE Picture SearchStop Special PlaybackSkip Search PAUSE/STILLPress Bor Ato select on Over until the repeat mode is canceledTo Watch a Tape Repeatedly Recording and Viewing the Same TV Program Recording a TV ProgramTo Stop Recording To Stop Recording Temporarily Screen and the REC indicator will lightPress Direct channel selection 0-9orCH + Ple ChannelPress Direct channel ONE-TOUCH Timer Recording OTRPress or to select Timer REC SET Timer RecordingPosition, then press Enter Press the or to select the programSpeed as in step Timer REC indicator will lightPress Enter Steps 3 to 6 to set the second programCancel Other Functions for the Timer RecordingTo Cancel a Program If the Program ProgramDisplay the elapsed time Using the Real Time Tape CounterTo View the Counter Display Before playback or recording, press Using Zero Return000000 Press Zero ReturnIndex search TV MonitorTo Monitor a TV Program Connection to Camcorder Duplicating a Video TapeConnection to Another VCR Reception Disturbances Check the following chart before requesting service Problem and Troubleshooting GuideSymptom Cause Possible Solution Power No powerRemote Control Symptom Cause Possible SolutionDepressed To turn on the closed caption RecordingVideo Head Cleaning Video Head CleaningVideo Head Clogging TelevisionLimited One 1 Year Warranty Limited Ninety 90 Day WarrantyLimited Two 2 Year Warranty of Picture Tube Rental UnitsToll Free How to Obtain Warranty ServiceContinental United States contact 04/04 U