Toshiba W-622 owner manual Setting the Clock

Setting the Clock

Example: To set the clock to 2:30 p.m. on August 25 (summer time) 2002.

1 Press PROG..

8 Press ENTER to start the “AUTO” clock set feature.

After the VCR is turned off, it automatically updates the clock using the data broadcast by the local TV stations.

The MENU screen appears on the TV.

2 Select “PRESET” using FF or REW, and press ENTER.

CLOCK SET

*The clock is

revised by broadcasting signal at 8:00 A.M

every morning.

CLOCK SET

SUMMER TIME

TIME ZOnE CH

SCAnnInG nOW

PREPARATION

CH MEMORY
EnD : PROG	ENTER

3 Press ENTER to select “CLOCK SET”.

CLOCK SET

SUMMER TIME

TIME ZOnE CH

PRESS EnTER

TO START SETTInG

9 Select the options using FF or REW. Change the data using PLAY or STOP.

1)Set “SUMMER TIME (Daylight-Saving Time)”.

DST start: Daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to 3:00 AM (forward one hour).

DST end: Daylight-saving time ends on the last Sunday in October. The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour).

remember that any part of a scheduled Timer Recording that falls between these

4 Select “AUTO” or “MANU” using PLAY or STOP.

AUTO: The VCR automatically sets or adjusts the clock.

If you select “AUTO” mode, proceed to step 8. MANU: You can set the clock manually.

If you select “MANU” mode, proceed to next step.

two times will not be recorded.

AUTO: the VCR is using the clock data Broadcast by the local TV stations.

IN: You want to use the DST function, and

you are leaving in the area that apply

Daylight-saving time.

OUT: You are not leaving in the area that apply Daylight-saving time and you do not

want to use DST function.

5 Vary the digits to set the hour.

PLAY : To increase.

STOP : To decrease.

6 Move to the next using FF

(To move back, press REW.)

2)Set “TIME ZONE”.

If you select “AUTO” for your time zone, the VCR sets the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select another time zone or use the “MANU” option.

7 Repeat step 5 and 6 to set the minutes, month, day, and the year (by the last two digits).

Proceed to step 10 to start the clock.

3) Set “CLOCK DATA CH”.

If you don't know the clock data channel, select “AUTO”. The VCR will scan automatically to tune the channel carrying the clock data.

If AUTO CLOCK SET is unsuccessful, set the time and date through the “MANU” clock set menu selection.

10 Press PROG..

Now the clock starts.

15