Toshiba W-622 owner manual Storing Channels on the VCR, Incoming Antenna/CableCATV Signals

PREPARATION

Storing Channels on the VCR

This section is required if you receive only normal TV or unscrambled cable channels

Incoming Antenna/Cable(CATV) Signals

The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK.

Preparation

•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).

•Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

VCR TV POWER

Incoming Antenna/Cable(CATV) Signals

1 Press PROG. to display the MENU screen.

1	2	3
		CH/TRK	Number
4	5	6
7	8	9	buttons
I.SELECT		TV VOL	100
	0	100
DISPLAY	REMAIN/	COUNT RESET TV/VCR
	COUNTER		I. SELECT
SP/SLP	REC	TIMER

REW

	PLAY
		PLAY, STOP
REW	CURSOR	FF
		FF

2 Select “PRESET” using FF or REW, and press ENTER.

CLOCK SET
CH MEMORY
EnD : PROG	ENTER

SLOW	PAUSE/STILL
STOP
	1,6
PROG. CANCEL	ENTER
A.SELECT	ENTER
EJECT	CM SKIP

3 Select “CH MEMORY” using PLAY
or STOP, and press ENTER.
TV/CATV	TV	CATV

AUTO SCAn	OFF		On
ADD CH		- -	CH
ERASE CH		- -	CH

4 Set “TV/CATV“to “TV” or “CATV” using FF or REW.

TV: To store channels received via the antenna.

CATV: To store channels received via the incoming cable.

5 Select “AUTO SCAN” using PLAY or STOP, and press FF to set to “ON”.

The VCR starts scanning and the channels are stored in the VCR in ascending order. When the scanning is finished, the screen automatically returns.

AUTO SCAn 2 CH on

6 Press PROG. twice to exit.

16