Connections (continued)
LINE | LINE | IN |
|
OUT | IN 1 | (FROM ANT.) |
|
| R |
|
|
| AUDIO |
|
|
| L | OUT RF |
|
| VIDEO | (TO TV) |
|
| CH |
|
|
|
|
| Cable box |
Incoming cable |
| IN | OUT |
LINE | LINE | IN |
OUT | IN 1 | (FROM ANT.) |
| R |
|
| AUDIO |
|
| L | OUT RF |
| VIDEO | (TO TV) |
| CH |
|
Cable box
IN
OUT
Incoming cable
A/B switch
| A |
|
A |
| |
B |
| |
Cable box | B |
|
|
| |
LINE | LINE | IN |
OUT | IN 1 | (FROM ANT.) |
| R |
|
| AUDIO |
|
| L | OUT RF |
| VIDEO | (TO TV) |
| CH |
|
Cable box 
LINE | LINE | IN |
OUT | IN 1 | (FROM ANT.) |
| R |
|
| AUDIO |
|
| L | OUT RF |
| VIDEO | (TO TV) |
| CH |
|
This set-up will enable you to:
–record an unscrambled channel.
–watch an unscrambled channel while recording it.
–record an unscrambled channel while watching another (scrambled or unscrambled).
You will need to:
•set TV channel to the output channel of the cable box.
•turn on the cable box and select cable channel 3 or 4 according to the output channel of the VCR.
•to record a channel while watching another, press TV/VCR on the remote control to turn off the “VCR” indicator in the VCR display and select a desired cable channel on the cable box.
This set-up will enable you to:
–watch an unscrambled or scrambled channel while recording it.
–record any channels through the cable box.
You will need to:
•set TV channel 3 or 4 to receive video signals. (See page 11.)
•set VCR channel to the output channel of the cable box, and select a desired cable channel on the cable box.
•while the VCR is turned off or the “VCR” indicator is not lit in the VCR display, set TV channel to the output channel of the cable box.
This set-up will enable you to:
–watch an unscrambled or scrambled channel while recording it.
–record an unscrambled channel while watching another unscrambled channel (only when you connect a
•A/B switch “A”: record and watch an unscrambled channel which comes bypassing the cable box.
•A/B switch “B”: record and watch a scrambled or unscrambled channel coming through the cable box.
This set-up will enable you to:
–watch or record a channel through the cable box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
•press I.SELECT so that the VCR display shows “L1”.
12