Timer Program Recording (continued)
5 Move to the next using FF, and set the recording date using PLAY or
STOP.
The date changes as follows:
→ 8/25 → 9/25 → … → 7/25 → WKLYSU → …
MO~FR ← WKLYSA ←
[WKLYSU]…[WKLYSA]: You can record TV programs on the same channel on the day and time every week.
[MO~FR]: You can record TV programs on the same channel on the day and time Monday through Friday.
6 Move to the next using FF, and set the hour and minutes of the recording start time.
P |
M |
7 Move to the next, and set the recording off time.
8 Move to the next, and select the tape speed (SP) using PLAY or
STOP.
For the tape speed “AUTO (Auto Speed
Select)”, see below.
To set another program, press FF, and select the next line pressing STOP. Repeat steps 4 to 8.
9 Press PROG..
Now programming is completed.
10 | REC | TIMER |
Press both TIMER simultaneously. |
|
The power turns off and the VCR enters the timer standby mode.
TIMER
Auto Speed Select | Notes |
LSAP
If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the recording tape speed to “AUTO”.
Recording starts in the SP tape speed and the VCR automatically selects the tape speed to record the program to the end. If the tape length is not long enough, the tape speed automatically changes from SP to SLP.
•Make sure that the tape length is selected correctly according to the tape used on the SET UP screen (page 22).
•When the SLP tape speed is selected and the tape length is not sufficient to record the program to the end, the program cannot be recorded to the end.
•The picture will be distorted when playing the part where the recording tape speed is switched from SP to SLP with the Auto Speed Select feature.
26